TUHS

tuhs@tuhs.org

61 participants
6531 discussions

RE: [pups] Ultrix-3.1 boot tape inside the PDP-11 distribution directory

by Fred N. van Kempen

Gregg, > Question 1) Has anyone actually followed the instructions and > description of same, found inside the readme file found in the > directory? Yes. They are a cut-and-paste log of my actual screens, although I can't remember exactly what was in the file. > Question 2) Was this on actual hardware? Or inside the Simh simulator? > Or even with one version of E11? I did installs on real hardware (MicroPDP-11/23 and MicroPDP-11/83), and on Ersatz-11 (V3.0) for DOS. > In my case this will be inside the Simh simulator, and I am basically > working straight from the beginning. If all goes well, I'll move it to > the E11 one. Ultrix-11 runs fine on SimH, with the "downs" that because SimH does not do detailed and correct CPU emulation, Ultrix gets confuzed every now and then, which does not happen with E11. I am preparing a new (V3.2) release of Ultrix-11 which has major changes, including: - full system regeneration off single source tree - full RAxx support - addition of VTserver, TDU and compress - compressed manual pages and documentation - Y2K support (not just date(1) ;-) The installation procedure has also changed to a more modern style. I don't have much time right now, so progress is slow. The above is "done", though. If you need help with Ultrix-11, pse contact me off-list. --fred

22 years, 8 months

[pups] Ultrix-3.1 boot tape inside the PDP-11 distribution directory

by Gregg C Levine

Hello from Gregg C Levine This is both my first post from this address, and a couple of questions. Question 1) Has anyone actually followed the instructions and description of same, found inside the readme file found in the directory? Question 2) Was this on actual hardware? Or inside the Simh simulator? Or even with one version of E11? In my case this will be inside the Simh simulator, and I am basically working straight from the beginning. If all goes well, I'll move it to the E11 one. ------------------- Gregg C Levine hansolofalcon(a)worldnet.att.net ------------------------------------------------------------ "The Force will be with you...Always." Obi-Wan Kenobi "Use the Force, Luke." Obi-Wan Kenobi (This company dedicates this E-Mail to General Obi-Wan Kenobi ) (This company dedicates this E-Mail to Master Yoda )

22 years, 8 months

Re: [TUHS] rtm

by msokolov＠ivan.Harhan.ORG

Jeffrey Sharp <jss(a)subatomix.com> wrote: > Yes, I believe I am somewhat younger than most the very respectable members > of this group. :-) I'm about the same. My timeline: 1979 born 1988 first computer: Soviet PDP-11 clone, first language: PDP-11 assembly 1995 first introduced to UNIX 1996 first live encounter with a VAX 1998 started maintaining my own version of VAX UNIX 2000 fully converted to it 2002 thinking about designing and building a new VAX CPU on an FPGA MS

22 years, 8 months

Actual names of boot images versus names listed in readme file for boot_images

by Gregg C Levine

Hello from Gregg C Levine I found out, on my system, and borrowing the Cygwin tools for file manipulation, the actual file name for .2,9BSD_rl02_1145.gz, it is rl02_2.9BSDroot, so I used that name in place of the one suggested inside the readme file. It works the same way. However, this is just the root collection. Is there any other pack available that contains the other members of the entire 2.9BSD system that provided us with this one? Also this was done with version 2.9-11 of Simh. So, when you get a chance, Warren, you can update the readme, and upload the appropriate file to the directory on your server. Oh yes, this came from a mirror of your site, its the one on ftp.tux.org Gregg C Levine drwho8(a)worldnet.att.net "Oh my!" The Second Doctor's nearly favorite phrase.

22 years, 8 months

Pack found in Tim Shoppa distribution but not listed

by Gregg C Levine

Hello from Gregg C Levine This is something that is totally different then what I first reported on regarding this distribution. In the readme for this one, it mentions everything list inside the directory, except the one marked down as "Unlabeled", and it originally came on a RL02 type diskpack. It is not listed in the Readme. Obviously it is what it says it is, an unlabled diskpack that Tim recovered the same day as the others, and those are indeed present, and listed. Except obviously the one that I first reported, that one isn't mentioned, and not there. That subject is done. I am just reporting on "Unlabeled", as far as everyone is concerned, is there anything on it? Or is it an empty pack? Gregg C Levine drwho8(a)worldnet.att.net "Oh my!" The Second Doctor's nearly favorite phrase.

22 years, 8 months

Re: [TUHS] Can someone advise me regarding a gui for UNIX

by Aharon Robbins

Another reason the 5620 was botched so badly was that AT&T wanted >= $2000 for the development kit (read: C compiler and libraries) for it. Not a good way to get lots of 3rd party application developers on your bandwagon. I used one for a year or so; it was the first windowing system I'd used and the only one I've really liked. For about 10 years I've been using 9wm, which gives a similar feel (at least to me). Those who want to go all the way should adopt 9term as well. (I generally run xterm + bash these days, although for a long while it was 9term + es/rc.) Somewhere, I have an X version of the 5620 font. I found that it wasn't so pretty. I've been using the pelm-latin1-9 font from the sam distribution for years. Norman forgot to mention that the most long-lived split-design application is Rob Pike's sam editor, still available for X11 and still in use on Plan 9. Arnold

22 years, 8 months

Re: Can someone advise me regarding a gui for UNIX

by Brian S Walden

Another hurdle for the 5620/630/730 lines of terminals was when I tried getting software support. Teletype being a mostly a "dumb" terminal manufacturer never considered them more that a way to have multilple 80 char x 24 line terminals on one display. I had difficulty in conveying to them that it was a computer in its own right and you could program it. The marketing was probably just as limited in scope. Another blow for the BLIT portion on the terminal came when you cound get an external cartridge for the 730 that turned it into an X-terminal. I got mine in 1991 and then rarely used layers after that. -B

22 years, 8 months

Re: Can someone advise me regarding a gui for UNIX

by Dennis Ritchie

Norman Wilson's account of the Jerq/Blit etc. is quite complete and correct, though there was some recycling of names. 'Jerq' actually was used quite early, when Pike got interested in bitmap graphics. The name was a takeoff on the Three Rivers Perq, which he (and I) saw at Lucasfilm Ltd. while attending an early Usenix. Blit was the slightly more PC version (suggested either as part of BitBlt or "Bell Labs Interactive Terminal). The originals used the Motorola 68000, and part of the development messup was AT&T Computer systems' decision to switch to the WE32000 processor with consequent delay for porting and reworking. The earliest versions were not quite as wonderful in practice as Norman suggests for the later ones. They were built by the Teletype corp. model shop (in quantity of a few hundred) and downloading the OS took several minutes at 1200bps--necessary at startup, since they didn't have a ROM for the whole thing, just enough for doing a download. They were also static electricity antennas! Many is the time that I would shift in my chair, then touch the keyboard, only to have the terminal reset itself. I developed the habit of putting my hand on the heavy steel case before moving around. On the other hand, the basic idea was architecturally right (and the later commercial versions were not so subject to static, and had ROM for the OS). They were even nicer at 9600bps. It's good to know that Norman is still using his. Dennis

22 years, 8 months

Re: [TUHS] Can someone advise me regarding a gui for UNIX

by A.P.Garcia

> I've been using this window system more or less daily since August 1984, > though only at home since I left Bell Labs in 1990. (I am using it to > type this message.) ! what other hardware and software do you run, if you don't mind my noseyness?

22 years, 8 months

re: c coding standards

by A.P.Garcia

> Not to be overly picky, but aren't there two copies of everything. yes, sorry. that's just how it was posted to usenet.

22 years, 8 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

TUHS