Hi, Some hints: First of all, the code is currently broken. Something is wrong, and it will not be able to mount the root fs or something, but shouldn't be hard to fix, because it used to work, and i did something wrong when playing with the code some years ago, with no backup to revert to. Originally, I used the commnad line tools of Borland C++ 3.0 to compile. You need Turbo Assembler, so the Borland C++ 1.0, which is freely available from Borland as "antique software" is not enough, you'll need the professional version at least, because it has the command line assembler. There is a top level makefile, which will create UN.EXE, this is the unix kernel. You run it under plain MSDOS, it will switch to protected mode, and with shift-esc it will return to DOS (do a sync before !). Probably it wouldn't be hard to make it work without DOS as a boot loader :-), but i never did it. If compiled with -DSTANDSH, the kernel will be built with a built-in shell (see KEN/UPROC.C for the command), that can be used to do some basic setup. It will for example create the /dev/tty entries on a blank root disk. (You still need the mkfs utility under dos to make a blank disk). I suggest to use a floppy as a root disk for initial trials. If you omit STANDSH, it will look for /etc/init to run. On the directory layout: CONF contains c.c, the device switch table DMR contains most of the device drivers H contains the kernel header files INCLUDE - the user header files KEN - rest of the kernel The low level kernel code is very ugly, as it evolved from experimenting with protected mode. There are lots of things, that i'm not proud of :-) SRC/CLIB0 - the C library SRC/SYSC - the syscall user side interface SRC/UTIL - the utilities and such, most should work UTIL - MSDOS utils to compile In the UTIL directory, there are the following utlities: c2a - used to compile the kernel, it search-and-replaces some stuff in the assemlby code, i donát exactly remember why, but it has to do something with the segmenent names. exe2v6 - utility to convert MSDOS exe program to a.out. See SRC/UTIL/Makefile for how to make such an exe. The programs have a built in, fixed size stack, because Borland C had problems separating code and stack segment. It could brobably be fixed, but i didn't do it, instead opted for fixed size stack, adjustable at compile time. exetr - it can transfer a file to unix via a floppy drive, i donát remember how it works, i think you put one file to a floppy, and use the kernel-shell to write it to a file-system. It is a really ugly idea :-) dumpfs - it is broken, it was intended to back-up a filesystem mkfs - MSDOS mode mkfs, answer the questions, you'll get the filesystem. There is no sanity check whatsoever, so be careful, it can screw your harddrive, if given wrong sector numbers. Have fun with it, and if you have questions, feel free to write me. Regards, Szabolcs