28 May
2020
28 May
'20
4:40 p.m.
Greetings,
What's the canonical source for patches to 2.9BSD and 2.11BSD?
I see we have 2.11BSD patch 469 dated last month in the archive. Where does
it come from? Has anybody climbed the hill to import all the patches into a
git repo? I've found some mirrors, but moe.2bsd.org has been down for me
for ages... How does Warren keep things up to date?
I also have a (maybe faulty) memory of a similar series of patches to
2.9BSD because it was the last BSD to support non-split I&D space machines.
yet a quick google search turns up nothing other than a set of patches
dated August 1985 (also in our archive) and some changes for variants of
hardware (pro, mscp). Is that it?
Warner
28 May
28 May
9:49 p.m.
On Thu, May 28, 2020 at 10:40:55AM -0600, Warner Losh wrote:
Greetings,
What's the canonical source for patches to 2.9BSD and 2.11BSD?
Steven Schultz is still the canonical source for 2.11BSD patches. He
sends them to me and I add them to the TUHS archive.
Recently I asked him to roll a new install tape which had all the patches
applied, at https://www.tuhs.org/Archive/Distributions/UCB/2.11BSD_patch457
I see we have 2.11BSD patch 469 dated last month in
the archive. Where
does it come from? Has anybody climbed the hill to import all the
patches into a git repo?
I know somebody tried a while back and reported here. They found it wasn't
possible to apply all the patches sequentially. I'd have to go look in
the mail archive for details.
Maybe it's time for someone else to have a go!
Cheers, Warren
29 May
29 May
12:59 a.m.
On Thu, May 28, 2020 at 3:49 PM Warren Toomey <wkt(a)tuhs.org> wrote:
I think so. There's 40 files that appear on a line starting with 'rm ' or
'Xrm ' (well maybe a few more if you count a non-functional lint removed,
no way to know for sure due to the '*').
10 of these files are either binaries, or are rendant man pages (meaning
the canonical copy is elsewhere and in a pinch we could have a very close
copy just omitting them entirely or copying from the canonical place). The
binaries can be regenerated. There's 3 files in pcc that can likely be
snagged from 2.10.1. There's 8 files named 'shortnames.h' that can be had
from 2.10.1 as well. There's 2 files that were created and then later
deleted. There's one non-existent file that was deleted. there's 10
toolchain related files that we can get from 2.10.1 and/or the CSRG SCCS
tree (haven't checked to see if the PDP-11 versions are there, they aren't
in the easily browsable svn conversion). The entire source for ar, nm and
ld are removed, but I think that 2.10.1 are the same, and/or CSRG repo
fallback. That leaves nsys.c as the only file not existing in 2.10.1, which
makes sense... it implements the new system call convention in 2.11, and it
too may be in the SCCS tree...
So based on that, I think it's worth giving it a try... :) Comments?
Warner
On Thu, May 28, 2020 at 10:40:55AM -0600, Warner Losh
wrote:
Yea. The oldest one we have is patch 195. which is good news!
Greetings,
What's the canonical source for patches to 2.9BSD and 2.11BSD?
Steven Schultz is still the canonical source for 2.11BSD patches. He
sends them to me and I add them to the TUHS archive.
Recently I asked him to roll a new install tape which had all the patches
applied, at
https://www.tuhs.org/Archive/Distributions/UCB/2.11BSD_patch457 I see we
have 2.11BSD patch 469 dated last month in the archive. Where
does it come from? Has anybody climbed the hill to import all the
patches into a git repo?
I know somebody tried a while back and reported here. They found it wasn't
possible to apply all the patches sequentially. I'd have to go look in
the mail archive for details.
Maybe it's time for someone else to have a go!
8 Apr
8 Apr
4:33 p.m.
Warren Toomey <wkt(a)tuhs.org> writes:
Stumbled upon this email thread while searching my inbox for some patch
info. I've managed to setup an automated pipeline for applying all
patches sequentially, producing a new disk image after each one. This
has been built as a GitHub workflow, and the images are then pushed up
to an S3 bucket for others to use.
https://github.com/AaronJackson/2.11BSD-Action
At the very least, it is confirmation and verification that the released
patches can be applied sequentially, and each one leaves the system in a
bootable state, if applied correctly.
I've also been applying the patches to a fork of the source tree on
GitHub which Warner Losh created (maybe after this email thread). I've
been doing this in the patch-apply2023 branch but it's a bit of a mess
at the moment and doesn't build. The repo also includes an IBV11 card
driver which I wrote with the help of Toby Thain. I'm not sure whether
Steven would welcome patches for new features, rather than bug fixes,
but I'd be happy to generate a patch file if others wanted to control
their "modern" test gear from their PDP11.
https://github.com/AaronJackson/2.11BSD
At some point I'm planning to automate the process of generating the
installation tapes for each patch level. Not got round to this though,
yet - although it's Easter weekend, so I might have a play.
Cheers,
Aaron
--
https://aaronsplace.co.uk
I see we
have 2.11BSD patch 469 dated last month in the archive. Where
does it come from? Has anybody climbed the hill to import all the
patches into a git repo?
I know somebody tried a while back and reported here. They found it wasn't
possible to apply all the patches sequentially. I'd have to go look in
the mail archive for details.
Maybe it's time for someone else to have a go!
Cheers, Warren
5:09 p.m.
On Sat, Apr 8, 2023, 11:06 AM Aaron Jackson <aaron(a)aaronsplace.co.uk> wrote:
Warren Toomey <wkt(a)tuhs.org> writes:
wasn't
Any chance you could extend this to my work to recreate the 2.11 as
released tapes? There are extra challenges in the first 200 patches,
including missing patches...
Warner
Cheers,
> I see we have 2.11BSD patch 469 dated last
month in the archive.
Where
does
it come from? Has anybody climbed the hill to import all the
patches into a git repo?
I know somebody tried a while back and reported here. They found it possible to apply all the patches sequentially.
I'd have to go look in
the mail archive for details.
Maybe it's time for someone else to have a go!
Cheers, Warren
Stumbled upon this email thread while searching my inbox for some patch
info. I've managed to setup an automated pipeline for applying all
patches sequentially, producing a new disk image after each one. This
has been built as a GitHub workflow, and the images are then pushed up
to an S3 bucket for others to use.
https://github.com/AaronJackson/2.11BSD-Action
At the very least, it is confirmation and verification that the released
patches can be applied sequentially, and each one leaves the system in a
bootable state, if applied correctly.
I've also been applying the patches to a fork of the source tree on
GitHub which Warner Losh created (maybe after this email thread). I've
been doing this in the patch-apply2023 branch but it's a bit of a mess
at the moment and doesn't build. The repo also includes an IBV11 card
driver which I wrote with the help of Toby Thain. I'm not sure whether
Steven would welcome patches for new features, rather than bug fixes,
but I'd be happy to generate a patch file if others wanted to control
their "modern" test gear from their PDP11.
https://github.com/AaronJackson/2.11BSD
At some point I'm planning to automate the process of generating the
installation tapes for each patch level. Not got round to this though,
yet - although it's Easter weekend, so I might have a play.
Aaron
--
https://aaronsplace.co.uk
5:22 p.m.
Warren Toomey <wkt(a)tuhs.org> writes:
Stumbled upon this email thread while searching my inbox for some patch
info. I've managed to setup an automated pipeline for applying all
patches sequentially, producing a new disk image after each one. This
has been built as a GitHub workflow, and the images are then pushed up
to an S3 bucket for others to use.
https://github.com/AaronJackson/2.11BSD-Action
At the very least, it is confirmation and verification that the released
patches can be applied sequentially, and each one leaves the system in a
bootable state, if applied correctly.
I've also been applying the patches to a fork of the source tree on
GitHub which Warner Losh created (maybe after this email thread). I've
been doing this in the patch-apply2023 branch but it's a bit of a mess
at the moment and doesn't build. The repo also includes an IBV11 card
driver which I wrote with the help of Toby Thain. I'm not sure whether
Steven would welcome patches for new features, rather than bug fixes,
but I'd be happy to generate a patch file if others wanted to control
their "modern" test gear from their PDP11.
https://github.com/AaronJackson/2.11BSD
At some point I'm planning to automate the process of generating the
installation tapes for each patch level. Not got round to this though,
yet - although it's Easter weekend, so I might have a play.
Warner Losh <imp(a)bsdimp.com> writes:
I see
we have 2.11BSD patch 469 dated last month in the archive. Where
does it come from? Has anybody climbed the hill to import all the
patches into a git repo?
I know somebody tried a while back and reported here. They found it wasn't
possible to apply all the patches sequentially. I'd have to go look in
the mail archive for details.
Maybe it's time for someone else to have a go!
Cheers, Warren Any chance you could extend this to my work to
recreate the 2.11 as
released tapes? There are extra challenges in the first 200 patches,
including missing patches...
Warner
If you are talking about this:
https://github.com/bsdimp/mk211bsd
I'll take a look and see - that does sound like a mess to sort out
though :D
cheers,
Aaron
5:26 p.m.
On Sat, Apr 8, 2023, 11:23 AM Aaron Jackson <aaron(a)aaronsplace.co.uk> wrote:
Warner Losh <imp(a)bsdimp.com> writes:
Yes. It's why I've not done it yet. Going backwards was hard enough :) I'd
love to help, but don't have the time to drive it.
Warner
Warren Toomey
<wkt(a)tuhs.org> writes:
>> I see we have 2.11BSD patch 469 dated last month in the archive.
Where
>> does it come from? Has anybody
climbed the hill to import all the
>> patches into a git repo?
>
> I know somebody tried a while back and reported here. They found it
wasn't
possible
to apply all the patches sequentially. I'd have to go look in
the mail archive for details.
Maybe it's time for someone else to have a go!
Cheers, Warren
Stumbled upon this email thread while searching my inbox for some patch
info. I've managed to setup an automated pipeline for applying all
patches sequentially, producing a new disk image after each one. This
has been built as a GitHub workflow, and the images are then pushed up
to an S3 bucket for others to use.
https://github.com/AaronJackson/2.11BSD-Action
At the very least, it is confirmation and verification that the released
patches can be applied sequentially, and each one leaves the system in a
bootable state, if applied correctly.
I've also been applying the patches to a fork of the source tree on
GitHub which Warner Losh created (maybe after this email thread). I've
been doing this in the patch-apply2023 branch but it's a bit of a mess
at the moment and doesn't build. The repo also includes an IBV11 card
driver which I wrote with the help of Toby Thain. I'm not sure whether
Steven would welcome patches for new features, rather than bug fixes,
but I'd be happy to generate a patch file if others wanted to control
their "modern" test gear from their PDP11.
https://github.com/AaronJackson/2.11BSD
At some point I'm planning to automate the process of generating the
installation tapes for each patch level. Not got round to this though,
yet - although it's Easter weekend, so I might have a play. Any chance you could extend this to my work to
recreate the 2.11 as
released tapes? There are extra challenges in the first 200 patches,
including missing patches...
Warner
If you are talking about this:
https://github.com/bsdimp/mk211bsd
I'll take a look and see - that does sound like a mess to sort out
though :D
cheers,
Aaron
762
days inactive
1807
days old
6 comments
3 participants
participants (3)
-
Aaron Jackson -
Warner Losh -
Warren Toomey