New subject: s editor

4 Jul 2020

Could someone point me to some information about s editor?

Googling didn't help

On Fri, Jul 3, 2020, 9:00 PM &lt;tuhs-request(a)minnie.tuhs.org wrote:

...
  Send TUHS mailing list submissions to
         tuhs(a)minnie.tuhs.org

 To subscribe or unsubscribe via the World Wide Web, visit
         https://minnie.tuhs.org/cgi-bin/mailman/listinfo/tuhs
 or, via email, send a message with subject or body 'help' to
         tuhs-request(a)minnie.tuhs.org

 You can reach the person managing the list at
         tuhs-owner(a)minnie.tuhs.org

 When replying, please edit your Subject line so it is more specific
 than "Re: Contents of TUHS digest..."

 Today's Topics:

    1. v7 uucp debugging help requested (Adam Thornton)
    2. Re: v7 uucp debugging help requested (Clem Cole)
    3. Re: v7 uucp debugging help requested (Grant Taylor)
    4. Re: v7 uucp debugging help requested (John Cowan)
    5. Re: v7 uucp debugging help requested (Clem Cole)
    6. Re: v7 uucp debugging help requested (Clem Cole)
    7. Re: v7 uucp debugging help requested (Norman Wilson)

 ----------------------------------------------------------------------

 Message: 1
 Date: Fri, 3 Jul 2020 13:52:42 -0700
 From: Adam Thornton &lt;athornton(a)gmail.com&gt;
 To: The Eunuchs Hysterical Society &lt;tuhs(a)tuhs.org&gt;
 Subject: [TUHS] v7 uucp debugging help requested
 Message-ID:
         <CAP2nic3UNxqi-obHwB5H+Ee+x5MKsd=eBrwhVbX+Ao3AgVPx=
 g(a)mail.gmail.com&gt;
 Content-Type: text/plain; charset="utf-8"

 (if this is better suited for COFF, that'd be fine too)

 I've been trying to set up UUCP on my V7 system and its raspberry Pi host.
 This plus the "s" editor (already working) are really all that's needed
to
 make this something pretty close to a daily driver, if all I wanted to do
 was write text files (which in some sense is all my job _is_, but to be
 fair I get a much more immediate feedback loop in my current environment).

 I was following

https://github.com/jwbrase/pdp11-tools/blob/master/howtos/V7%20UUCP%20Insta…
 more or less--I had already rebuilt v7 with the DZ terminal driver and was
 using it for interactive sessions (albeit, before I started trying to get
 UUCP running, with 7-bit line discipline--but I've since changed that).

 I have 16 DZ lines, I've set them to 8-bit mode.  They're working fine,
 because I can use them for terminal sessions.

 I've built UUCP, set a node name, and set it up on the pi.

 I can execute uucico to send files, and it, frustratingly, almost works.

 From the Pi side, I see (with uulog): 
 uucico v7 - (2020-07-03 08:11:34.97 23106) Calling system v7 (port TCP)
 uucico v7 - (2020-07-03 08:11:42.25 23106) Login successful
 uucico v7 - (2020-07-03 08:11:44.44 23106) Handshake successful (protocol
 'g' sending packet/window 64/3 receiving 64/7)
 uucico v7 adam (2020-07-03 08:11:51.61 23106) Sending
 /home/adam/git/simh/sim_scsi.h (6780 bytes)
 uucico v7 adam (2020-07-03 08:16:21.79 23106) ERROR: Timed out waiting for
 packet
 uucico v7 - (2020-07-03 08:16:21.80 23106) Protocol 'g' packets: sent 86,
 resent 6, received 1
 uucico v7 - (2020-07-03 08:16:21.80 23106) Errors: header 2, checksum 0,
 order 0, remote rejects 0
 uucico v7 - (2020-07-03 08:16:22.51 23106) Call complete (283 seconds 5440
 bytes 19 bps)

 So it's clearly logging in, and if I telnet in directly, the v7 end is
 starting uucico as expected:

 login: pi-uucp
 Password:
 Shere

 uulog -x on the v7 side has no output, and nothing ever appears in the
 spool directory, which I suspect is a direct result of the timeout waiting
 for packet.

 So my question is, what else do I do to debug this?  Clearly the pi (Taylor
 UUCP) side is expecting something else--maybe an acknowledgement?--from the
 v7 side to let it know the transmission was successful.

 Any help would be appreciated.

 Adam

Re: [TUHS] s editor