Henry - the infamous Ken and Dennis picture: https://www.bell-labs.com/usr/dmr/www/ken-and-den.jpg show the 11/20's display. Their is a console display is hidden behind the right most ASR-33 [the console for the 11/20, I think], and Ken is typing to another processor - it's either an 11/40 or 11/45, given the parts of the bezel shown in the picture. The picture also shows 2 RK's, 2 DEC Tape and a Paper Tape read/punch, and the Tek display on the table. The Fifth Edition tape the low.s and conf.c list an 11/40 with drivers for the RK05, KL, DC serial, and the PPT unit. The Sixth edition is the first time we see mch40 and mch45. There is also a rkunix, rpunix and hpunix on the distribution tape. The l.s file shows KL, DEC Tape, 9-Track and RP04 drivers (but no DC-11s). We also see Ken's "sysfix" to deal with the separate I/D space. So ... I'm would have suspected that the first 11/45 had an RP04 as well as at least one RK05, a TM-11 with a 9-track, and the DEC Tape unit. The amount of memory is, of course, unknown. It was pretty expensive in those days, but I would have expected they would have pushed it to the max [256K]. ᐧ On Mon, Jul 17, 2023 at 3:44 PM Henry Bent <henry.r.bent(a)gmail.com> wrote: