5 Mar
2003
5 Mar
'03
6:23 a.m.
Hello from Gregg C Levine
In the documentation for E-11, John Wilson, describes the "blinky
lights", essentially eight LEDs attached to the printer port of an
IBM-PC that's running his emulator.
Has anyone ever built one of those things, using either a PC board
blank from John Wilson, or decided to build one on his own? For that
matter, has anyone actually used it, to assist in the debugging of a
program, running on his emulator?
I'll probably e-mail John Wilson about this one directly, but, has
anyone written a custom plug-in, that would have the printer port,
pose as an I/O port for the emulator?
-------------------
Gregg C Levine hansolofalcon(a)worldnet.att.net
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke." Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan Kenobi )
(This company dedicates this E-Mail to Master Yoda )
5 Mar
5 Mar
7:13 a.m.
Gregg,
See the ultimate case of blinking the lights
at http://home.hetnet.nl/~tshaj/pdpsite/pdpstartpage.html
Click on the "Homebrew PDP-11" in the left frame.
Also, see the KY11 interface
at http://www.sparetimegizmos.com/Hardware/KY11_Interface.htm
John has a lot of friends!
Dave
Gregg C Levine wrote:
Hello from Gregg C Levine
In the documentation for E-11, John Wilson, describes the "blinky
lights", essentially eight LEDs attached to the printer port of an
IBM-PC that's running his emulator.
Has anyone ever built one of those things, using either a PC board
blank from John Wilson, or decided to build one on his own? For that
matter, has anyone actually used it, to assist in the debugging of a
program, running on his emulator?
I'll probably e-mail John Wilson about this one directly, but, has
anyone written a custom plug-in, that would have the printer port,
pose as an I/O port for the emulator?
-------------------
Gregg C Levine hansolofalcon(a)worldnet.att.net
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke." Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan Kenobi )
(This company dedicates this E-Mail to Master Yoda )
_______________________________________________
PUPS mailing list
PUPS(a)minnie.tuhs.org
http://minnie.tuhs.org/mailman/listinfo/pups
--
David C. Jenner
djenner(a)earthlink.net
10:56 a.m.
Hello again from Gregg C Levine
Looks good. However, I meant to use the printer-port as an I/O port,
as one would use one of the dedicate boards that the original PDP-11
wore.
Granted, it would be difficult to apply it, but according to a book on
the subject of PC interfacing, it can be done.
-------------------
Gregg C Levine hansolofalcon(a)worldnet.att.net
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke." Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan Kenobi )
(This company dedicates this E-Mail to Master Yoda )
-----Original Message-----
From: pups-admin(a)minnie.tuhs.org [mailto:pups-admin@minnie.tuhs.org]
On
Behalf Of David C. Jenner
Sent: Tuesday, March 04, 2003 8:14 PM
To: Gregg C Levine
Cc: pups(a)minnie.tuhs.org
Subject: Re: [pups] Blinky lights, and E-11
Gregg,
See the ultimate case of blinking the lights
at http://home.hetnet.nl/~tshaj/pdpsite/pdpstartpage.html
Click on the "Homebrew PDP-11" in the left frame.
Also, see the KY11 interface
at http://www.sparetimegizmos.com/Hardware/KY11_Interface.htm
John has a lot of friends!
Dave
Gregg C Levine wrote:
>
> Hello from Gregg C Levine
> In the documentation for E-11, John Wilson, describes the "blinky
> lights", essentially eight LEDs attached to the printer port of an
> IBM-PC that's running his emulator.
>
> Has anyone ever built one of those things, using either a PC board
> blank from John Wilson, or decided to build one on his own? For
that
> matter, has anyone actually used it, to assist in
the debugging of
a
program,
running on his emulator?
I'll probably e-mail John Wilson about this one directly, but, has
anyone written a custom plug-in, that would have the printer port,
pose as an I/O port for the emulator?
-------------------
Gregg C Levine hansolofalcon(a)worldnet.att.net
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke." Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan Kenobi )
(This company dedicates this E-Mail to Master Yoda )
_______________________________________________
PUPS mailing list
PUPS(a)minnie.tuhs.org
http://minnie.tuhs.org/mailman/listinfo/pups
--
David C. Jenner
djenner(a)earthlink.net
_______________________________________________
PUPS mailing list
PUPS(a)minnie.tuhs.org
http://minnie.tuhs.org/mailman/listinfo/pups
7963
days inactive
7963
days old
2 comments
2 participants
participants (2)
-
David C. Jenner -
Gregg C Levine