From:
staylor(a)mrynet.com (S. Akmentins-Teilors)
THe other change I had to make was to 'devices.c' to speed up the
clock - it's still not right for a PPro-200 but is better than it
was (the clock was running far too slow, now it's just ~10% too slow).
The same similar tweak on Supnik has me to within seconds on the hour. They're
all gonna start losing it under load anyways, but that's life when running
an emulator under non-RT ;)
And if anyone
has managed to get the Begemot emulator
working on recent FreeBSD-4.0-CURRENT versions, I'd be
Not FreeBSD but if you're getting bit by the same thing I did earlier
under another BSD that switched from a.out to ELF the changes below
may be useful to you.
Actually, I had resolved issue of linking and the prepended underscores before.
The compile has always been clean, but the program simply doesn't work.
For example, run with -b from the command line, it returns the shell prompt
almost immediately. Otherwise, when booting it simply indicates:
DCOK = 1 asserted
and goes back to the emulator prompt.
That happens regardless of disk image used, etc... I can't effect anything
other than these exhibitions.
Perhaps somewith with access to 4.0-CURRENT, and who has worked with the
code itself could find the time to figured it out? ;)
-skots
--
Scott G. Akmentins-Taylor InterNet: staylor(a)mrynet.com
MRY Systems staylor(a)mrynet.lv
(Skots Gregorijs Akmentins-Teilors -- just call me "Skots")
----- Labak miris neka sarkans -----
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id JAA34673
for pups-liszt; Thu, 26 Aug 1999 09:53:48 +1000 (EST)
From Warren Toomey <wkt(a)henry.cs.adfa.edu.au> Thu
Aug 26 09:53:30 1999
Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au
[131.236.21.158])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id JAA34669
for <pups(a)minnie.cs.adfa.edu.au>; Thu, 26 Aug 1999 09:53:36 +1000 (EST)
Received: (from wkt@localhost)
by henry.cs.adfa.edu.au (8.9.2/8.9.1) id JAA07610;
Thu, 26 Aug 1999 09:53:30 +1000 (EST)
(envelope-from wkt)
From: Warren Toomey <wkt(a)henry.cs.adfa.edu.au>
Message-Id: <199908252353.JAA07610(a)henry.cs.adfa.edu.au>
Subject: Re: Modified Supnik emulator for the 11
In-Reply-To: <199908252113.OAA15059(a)mrynet.com> from "S.
Akmentins-Teilors" at "Aug 25, 1999 2:13:40 pm"
To: staylor(a)mrynet.com (S. Akmentins-Teilors)
Date: Thu, 26 Aug 1999 09:53:30 +1000 (EST)
Cc: pups(a)minnie.cs.adfa.edu.au
Reply-To: wkt(a)cs.adfa.edu.au
X-Mailer: ELM [version 2.4ME+ PL43 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
In article by S. Akmentins-Teilors:
[Supnik emulator improvements]
Is anyone else out the hacking it up and interested in
sharing
any work?
-skots
I'm sure Bob Supnik would appreciate your changes.
Cheers,
Warren
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id PAA36011
for pups-liszt; Thu, 26 Aug 1999 15:26:58 +1000 (EST)
From "Steven M. Schultz"
<sms(a)moe.2bsd.com> Thu Aug 26 15:26:27 1999
Received: from
moe.2bsd.com
(0(a)MOE.2BSD.COM [206.139.202.200])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id PAA36007
for <pups(a)minnie.cs.adfa.edu.au>; Thu, 26 Aug 1999 15:26:51 +1000 (EST)
Received: (from sms@localhost)
by
moe.2bsd.com (8.9.0/8.9.0) id WAA20951
for pups(a)minnie.cs.adfa.edu.au; Wed, 25 Aug 1999 22:26:27 -0700 (PDT)
Date: Wed, 25 Aug 1999 22:26:27 -0700 (PDT)
From: "Steven M. Schultz" <sms(a)moe.2bsd.com>
Message-Id: <199908260526.WAA20951(a)moe.2bsd.com>
To: pups(a)minnie.cs.adfa.edu.au
Subject: Re: Modified Supnik emulator for the 11
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hi -
From: staylor(a)mrynet.com (S. Akmentins-Teilors)
The same similar tweak on Supnik has me to within seconds on the hour. They're
all gonna start losing it under load anyways, but that's life when running
an emulator under non-RT ;)
Actually my problem with the Supnik emulator is that the clock runs
_very_ fast - the "PDP11" ends up being hours ahead of the real time
after recompiling a kernel or two.
p11 on the other hand tends to run slow - tweeking the device.c value
was aimed at speeding up the clock.
Actually,I had resolved issue of linking and the
prepended underscores before.
With a change to 'geni.c' or by editing the instab.s file?
For example, run with -b from the command line, it
returns the shell prompt
almost immediately. Otherwise, when booting it simply indicates:
DCOK = 1 asserted
Yep - that's what I was seeing until I regenerated the instab.s file
by running 'geni'. The emulator would compile and link with a
manually edited instab.s file but simply would not run correctly.
Since the same RP06 image worked with the Supnik emulator I knew it
wasn't in the 2.11BSD area.
Steven
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id RAA36475
for pups-liszt; Thu, 26 Aug 1999 17:02:07 +1000 (EST)