Hello all, A friend of mine has liberated an old Intergraph 2700 workstation from a basement. The system looks to be in fine condition and boots up to multiuser+X. However, there appears to be a problem. I am not sure whether the problem is hardware or software, but the digitizer puck seems to have stopped sending anything back to the workstation. I have to say that I am not 100% sure how Intergraph digitizers are wired up -- the cable from the digitizer is run via a split cable, so one can be wired up to the mouse port, and the other to the RS232 port, right now I have plugged both in. Is there anyone with Intergraph experience who can enlighten me in regards to the cables, or maybe some diagnostics that can be done on the puck? The puck is a 12-button grey creature, and the digitizer is a Kurta XLC (sorry, I am not infront of the system right now, and can't remember the model number). Another thing to note is that I can't recover the root password without some sort of pointer device input, and thus cannot log in to diagnose any possible software problems. -- Best regards, Paul mailto:asmodai@ao.mine.nu http://ao.mine.nu/ (NeXTmail) mailto:nextmail@ao.mine.nu