Hi, Has anyone tried to install the ultrix-3.x distribution using simh? I hacked a little program to build a tape image. It boots fine. I told the ultrix install I wanted to install for an 11/34 on a RL02. It seems to install fine and then reboot on the RL02 but hang in the shell after the boot (see below). I know using an RL02 with an 34 is optimistic :-) it's just that what I have for actual hardware. any idea if this is an simh problem or an ultrix problem or user error? -brad output: ... ****** BOOTING ULTRIX-11 SYSTEM TO SINGLE-USER MODE ****** Sizing Memory... Boot: rl(0,0)unix (CTRL/C will abort auto-boot) rl(0,0)unix: 14784+17026+8192+8000+8064+8192+8128+8128+8128+8192+8192+8064+7744+ 6976 ULTRIX-11 Kernel V3.0 realmem = 253952 buffers = 25600 clists = 1600 usermem = 95232 maxumem = 95232 erase = delete, kill = ^U, intr = ^C