17 Feb
1999
17 Feb
'99
4:23 a.m.
I'm trying to compile a 2.9BSD kernel using the distribution from the
pups archive.
"make unix" failed:
Make: Don't know how to make /usr/include/sys/mbuf.h. Stop.
I looked in the usr.tar from the distribution, and I don't see mbuf.h
anywhere.
Does anyone know where I can find a copy of this file?
Cheers,
entropy
--
entropy -- it's not just a good idea, it's the second law.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id QAA11005
for pups-liszt; Wed, 17 Feb 1999 16:17:41 +1100 (EST)
From "Steven M. Schultz"
<sms(a)moe.2bsd.com> Wed Feb 17 15:15:02 1999
Received: from moe.2bsd.com
(0(a)MOE.2BSD.COM [206.139.202.200])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id QAA11000
for <pups(a)minnie.cs.adfa.edu.au>; Wed, 17 Feb 1999 16:17:28 +1100 (EST)
Received: (from sms@localhost)
by moe.2bsd.com (8.9.0/8.9.0) id VAA23159
for pups(a)minnie.cs.adfa.edu.au; Tue, 16 Feb 1999 21:15:02 -0800 (PST)
Date: Tue, 16 Feb 1999 21:15:02 -0800 (PST)
From: "Steven M. Schultz" <sms(a)moe.2bsd.com>
Message-Id: <199902170515.VAA23159(a)moe.2bsd.com>
To: pups(a)minnie.cs.adfa.edu.au
Subject: Re: 2.9BSD: mbuf.h
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hi -
I'm trying to compile a 2.9BSD kernel using the
distribution from the
pups archive.
"make unix" failed:
Make: Don't know how to make /usr/include/sys/mbuf.h. Stop.
I looked in the usr.tar from the distribution, and I don't see mbuf.h
anywhere.
Does anyone know where I can find a copy of this file?
That's not _all_ your missing ;-)
Unless you have the 1985 Seismo (or Harvard - depends where you
got the tape from) update tape to 2.9 the networking code won't
compile much less run. Been there, done that. It was a fun couple
weeks coming to the realization that the networking code hadn't
been fully integrated and compiled in 2.9
I believe the 2.9-Seismo update is in the PUPS archive (should be
on the CD but my memory isn't ECC these days ;-)). It's a fairly
painful upgrade process because it changes the a.out header format
for overlaid processes (goes from 7 to 15 overlays). If you're not
real careful you'll have (as I did ;-)) a real mess: can't finish
the upgrade because the old kernel doesn't support the new overlaid
processes but you can't build a new kernel because doing so needs
those processes. Something like that. It was "interesting" ;)
Steven Schultz
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id QAA11030
for pups-liszt; Wed, 17 Feb 1999 16:24:28 +1100 (EST)
From Warren Toomey <wkt(a)henry.cs.adfa.edu.au> Wed
Feb 17 15:26:09 1999
Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au
[131.236.21.158])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id QAA11024
for <pups(a)minnie.cs.adfa.oz.au>; Wed, 17 Feb 1999 16:24:18 +1100 (EST)
Received: (from wkt@localhost)
by henry.cs.adfa.edu.au (8.9.1/8.9.1) id QAA14818;
Wed, 17 Feb 1999 16:26:09 +1100 (EST)
(envelope-from wkt)
From: Warren Toomey <wkt(a)henry.cs.adfa.edu.au>
Message-Id: <199902170526.QAA14818(a)henry.cs.adfa.edu.au>
Subject: Re: 2.9BSD: mbuf.h
In-Reply-To: <199902170515.VAA23159(a)moe.2bsd.com> from "Steven M. Schultz"
at "Feb 16, 1999 9:15: 2 pm"
To: sms(a)moe.2bsd.com (Steven M. Schultz)
Date: Wed, 17 Feb 1999 16:26:09 +1100 (EST)
Cc: pups(a)minnie.cs.adfa.oz.au (Unix Heritage Society)
Reply-To: wkt(a)cs.adfa.oz.au
X-Mailer: ELM [version 2.4ME+ PL43 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
In article by Steven M. Schultz:
Hi -
Don't worry, Nicholas is trying to patch 2.9 to get it to run on a Pro.
I'm sure he will keep us informed :-)
'Night!
Warren
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id RAA11134
for pups-liszt; Wed, 17 Feb 1999 17:01:58 +1100 (EST)
I'm trying to compile a 2.9BSD kernel using
the distribution from the
pups archive.
Make: Don't know how to make /usr/include/sys/mbuf.h. Stop.
Does anyone know where I can find a copy of this file?
That's not _all_ your missing ;-)
Unless you have the 1985 Seismo (or Harvard - depends where you
got the tape from) update tape to 2.9 the networking code won't
compile much less run. Been there, done that. It was a fun couple
weeks coming to the realization that the networking code hadn't
been fully integrated and compiled in 2.9
I believe the 2.9-Seismo update is in the PUPS archive (should be
on the CD but my memory isn't ECC these days ;-)). It's a fairly
painful upgrade process because it changes the a.out header format
for overlaid processes (goes from 7 to 15 overlays). If you're not
real careful you'll have (as I did ;-)) a real mess: can't finish
the upgrade because the old kernel doesn't support the new overlaid
processes but you can't build a new kernel because doing so needs
those processes. Something like that. It was "interesting" ;)
Steven Schultz From "David C. Jenner"
<djenner(a)halcyon.com> Wed Feb 17 16:00:45 1999
Received: from
smtp10.nwnexus.com (smtp10.nwnexus.com [206.63.63.53])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id RAA11128
for <pups(a)minnie.cs.adfa.edu.au>; Wed, 17 Feb 1999 17:01:40 +1100 (EST)
Received: from halcyon.com (66-a-usw.rb1.blv.nwnexus.net [206.63.251.66])
by smtp10.nwnexus.com (8.8.8/8.8.8) with ESMTP id WAA05965;
Tue, 16 Feb 1999 22:01:09 -0800 (PST)
Message-ID: <36CA5B0D.8A2B2629(a)halcyon.com>
Date: Tue, 16 Feb 1999 22:00:45 -0800
From: "David C. Jenner" <djenner(a)halcyon.com>
Reply-To: djenner(a)halcyon.com
X-Mailer: Mozilla 4.5 [en] (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: wkt(a)cs.adfa.oz.au
CC: "Steven M. Schultz" <sms(a)moe.2bsd.com>,
Unix Heritage Society <pups(a)minnie.cs.adfa.oz.au>,
PDP-11 Unix Preservation Society <pups(a)minnie.cs.adfa.edu.au>
Subject: Re: 2.9BSD: mbuf.h
References: <199902170526.QAA14818(a)henry.cs.adfa.edu.au>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Speaking of the Pro, I have one and have been trying to get Venix
to run on it. The rub is, there are two versions: one directly from
VenturCom (Venix/Pro) and one licensed through DEC (Pro/Venix).
Venix/Pro is freely available on the Internet at ftp.update.uu.se,
but Pro/Venix seems to be a little harder to find. Pro/Venix is
much to be preferred because you can reconfigure the kernel (in
binary) to include different drivers, etc.
I've been able to acquire all the documentation and all (almost) the
disks for Pro/Venix 2.0. A couple of the disks are apparently
unusable or missing in the set I have.
It seems to me that Pro/Venix is a potential candidate for the PUPS
archive, the snag being DEC/Compaq residual interests in it. PUPS
covers the AT&T part, VenturCom has "given away" their part, and
DEC/Compaq is all that's left.
So:
1) Could this be a PUPS addition, if a good copy be found?
2) If someone has a copy, but worries about the DEC/Compaq
aspects, can a good copy of the disks I have be acquired?
(Anyone in this category might want to respond directly
to me instead of posting to the mailing lists.) After
all a PUPS licensee is 99.999% covered, and DEC/Compaq
objections are probably to worry about the AT&T part,
which the Ancient Unix license covers...
Actually, I'm amazed I've gotten as far as I have with this, because
I've been pretty passive about finding it. It's only taken 2 years
so far.
Dave
Warren Toomey wrote:
In article by Steven M. Schultz:
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id RAA11133
for pups-liszt; Wed, 17 Feb 1999 17:01:50 +1100 (EST)
Hi -
Don't worry, Nicholas is trying to patch 2.9 to get it to run on a Pro.
I'm sure he will keep us informed :-)
'Night!
Warren I'm trying to compile a 2.9BSD kernel using
the distribution from the
pups archive.
Make: Don't know how to make /usr/include/sys/mbuf.h. Stop.
Does anyone know where I can find a copy of this file?
That's not _all_ your missing ;-)
Unless you have the 1985 Seismo (or Harvard - depends where you
got the tape from) update tape to 2.9 the networking code won't
compile much less run. Been there, done that. It was a fun couple
weeks coming to the realization that the networking code hadn't
been fully integrated and compiled in 2.9
I believe the 2.9-Seismo update is in the PUPS archive (should be
on the CD but my memory isn't ECC these days ;-)). It's a fairly
painful upgrade process because it changes the a.out header format
for overlaid processes (goes from 7 to 15 overlays). If you're not
real careful you'll have (as I did ;-)) a real mess: can't finish
the upgrade because the old kernel doesn't support the new overlaid
processes but you can't build a new kernel because doing so needs
those processes. Something like that. It was "interesting" ;)
Steven Schultz From "David C. Jenner"
<djenner(a)halcyon.com> Wed Feb 17 16:00:45 1999
Received: from
smtp10.nwnexus.com (smtp10.nwnexus.com [206.63.63.53])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id RAA11122
for <pups(a)minnie.cs.adfa.oz.au>; Wed, 17 Feb 1999 17:01:34 +1100 (EST)
Received: from halcyon.com (66-a-usw.rb1.blv.nwnexus.net [206.63.251.66])
by smtp10.nwnexus.com (8.8.8/8.8.8) with ESMTP id WAA05965;
Tue, 16 Feb 1999 22:01:09 -0800 (PST)
Message-ID: <36CA5B0D.8A2B2629(a)halcyon.com>
Date: Tue, 16 Feb 1999 22:00:45 -0800
From: "David C. Jenner" <djenner(a)halcyon.com>
Reply-To: djenner(a)halcyon.com
X-Mailer: Mozilla 4.5 [en] (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: wkt(a)cs.adfa.oz.au
CC: "Steven M. Schultz" <sms(a)moe.2bsd.com>,
Unix Heritage Society <pups(a)minnie.cs.adfa.oz.au>,
PDP-11 Unix Preservation Society <pups(a)minnie.cs.adfa.edu.au>
Subject: Re: 2.9BSD: mbuf.h
References: <199902170526.QAA14818(a)henry.cs.adfa.edu.au>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Speaking of the Pro, I have one and have been trying to get Venix
to run on it. The rub is, there are two versions: one directly from
VenturCom (Venix/Pro) and one licensed through DEC (Pro/Venix).
Venix/Pro is freely available on the Internet at ftp.update.uu.se,
but Pro/Venix seems to be a little harder to find. Pro/Venix is
much to be preferred because you can reconfigure the kernel (in
binary) to include different drivers, etc.
I've been able to acquire all the documentation and all (almost) the
disks for Pro/Venix 2.0. A couple of the disks are apparently
unusable or missing in the set I have.
It seems to me that Pro/Venix is a potential candidate for the PUPS
archive, the snag being DEC/Compaq residual interests in it. PUPS
covers the AT&T part, VenturCom has "given away" their part, and
DEC/Compaq is all that's left.
So:
1) Could this be a PUPS addition, if a good copy be found?
2) If someone has a copy, but worries about the DEC/Compaq
aspects, can a good copy of the disks I have be acquired?
(Anyone in this category might want to respond directly
to me instead of posting to the mailing lists.) After
all a PUPS licensee is 99.999% covered, and DEC/Compaq
objections are probably to worry about the AT&T part,
which the Ancient Unix license covers...
Actually, I'm amazed I've gotten as far as I have with this, because
I've been pretty passive about finding it. It's only taken 2 years
so far.
Dave
Warren Toomey wrote:
In article by Steven M. Schultz:
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id TAA11461
for pups-liszt; Wed, 17 Feb 1999 19:23:34 +1100 (EST)
Hi -
Don't worry, Nicholas is trying to patch 2.9 to get it to run on a Pro.
I'm sure he will keep us informed :-)
'Night!
Warren I'm trying to compile a 2.9BSD kernel using
the distribution from the
pups archive.
Make: Don't know how to make /usr/include/sys/mbuf.h. Stop.
Does anyone know where I can find a copy of this file?
That's not _all_ your missing ;-)
Unless you have the 1985 Seismo (or Harvard - depends where you
got the tape from) update tape to 2.9 the networking code won't
compile much less run. Been there, done that. It was a fun couple
weeks coming to the realization that the networking code hadn't
been fully integrated and compiled in 2.9
I believe the 2.9-Seismo update is in the PUPS archive (should be
on the CD but my memory isn't ECC these days ;-)). It's a fairly
painful upgrade process because it changes the a.out header format
for overlaid processes (goes from 7 to 15 overlays). If you're not
real careful you'll have (as I did ;-)) a real mess: can't finish
the upgrade because the old kernel doesn't support the new overlaid
processes but you can't build a new kernel because doing so needs
those processes. Something like that. It was "interesting" ;)
Steven Schultz From maximum entropy
<entropy(a)zippy.bernstein.com> Wed Feb 17 18:22:50 1999
Received: from
zippy.bernstein.com (entropy(a)zippy.bernstein.com [206.20.83.202])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id TAA11456
for <pups(a)minnie.cs.adfa.oz.au>; Wed, 17 Feb 1999 19:23:21 +1100 (EST)
Received: (from entropy@localhost)
by zippy.bernstein.com (8.9.1/8.9.1) id DAA24861;
Wed, 17 Feb 1999 03:22:50 -0500 (EST)
Date: Wed, 17 Feb 1999 03:22:50 -0500 (EST)
Message-Id: <199902170822.DAA24861(a)zippy.bernstein.com>
From: maximum entropy <entropy(a)zippy.bernstein.com>
To: djenner(a)halcyon.com
CC: pups(a)minnie.cs.adfa.oz.au
In-reply-to: <36CA5B0D.8A2B2629(a)halcyon.com> (djenner(a)halcyon.com)
Subject: Venix (was Re: 2.9BSD: mbuf.h)
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Date: Tue, 16 Feb 1999 22:00:45 -0800
From: "David C. Jenner" <djenner(a)halcyon.com>
Speaking of the Pro, I have one and have been trying to get Venix
to run on it. The rub is, there are two versions: one directly from
VenturCom (Venix/Pro) and one licensed through DEC (Pro/Venix).
Interesting...I know there's a Venix 1.0 and a Venix 2.0. I thought
they were both from Venturcom, with 1.0 being for the Pro-350 and 2.0
for the Pro-380. I never heard of a distinction between Venix/Pro
vs. Pro/Venix. Then again, I got into this game fairly late...I
bought my used Pro-350 around 1993 for US$100, with Venix 1.0 already
installed (also with original install media and docs).
Venix/Pro is freely available on the Internet at
ftp.update.uu.se,
but Pro/Venix seems to be a little harder to find. Pro/Venix is
much to be preferred because you can reconfigure the kernel (in
binary) to include different drivers, etc.
I've been able to acquire all the documentation and all (almost) the
disks for Pro/Venix 2.0. A couple of the disks are apparently
unusable or missing in the set I have.
I have the following archives of Venix-related stuff that I snagged
from the net a few years back. If you think any of them might contain
what you're looking for, let me know and I'll give more detail about
their contents.
-rw-r--r-- 1 entropy user 3833 Oct 17 1997 README
-rw-r--r-- 1 entropy user 532 Oct 17 1997 README.VAX
-rw-r--r-- 1 entropy user 30819 Oct 17 1997 RX50.notes
-rw-r--r-- 1 entropy user 2530759 Oct 17 1997 Venix1.tar.Z
-rw-r--r-- 1 entropy user 2503931 Oct 17 1997 Venix2.tar.Z
-rw-r--r-- 1 entropy user 15817 Oct 17 1997 cathang.txt
-rw-r--r-- 1 entropy user 332543 Oct 17 1997 mopimage.tar.Z
-rw-r--r-- 1 entropy user 443 Oct 17 1997 nbsdrx50.readme
-rw-r--r-- 1 entropy user 897510 Oct 17 1997 nbsdrx50.zip
-rw-r--r-- 1 entropy user 155648 Oct 17 1997 pppd
-rw-r--r-- 1 entropy user 193536 Oct 17 1997 pr0801eng.sys
-rw-r--r-- 1 entropy user 14153 Oct 17 1997 raind112.zip
-rw-r--r-- 1 entropy user 6621 Oct 17 1997 rx50.zip
-rw-r--r-- 1 entropy user 81152 Oct 17 1997 teledisk.zip
-rw-r--r-- 1 entropy user 61440 Oct 17 1997 venix.tar
-rw-r--r-- 1 entropy user 116 Oct 17 1997 venix1.readme
-rw-r--r-- 1 entropy user 1119490 Oct 17 1997 venix1s.zip
-rw-r--r-- 1 entropy user 1095824 Oct 17 1997 venix1u.zip
-rw-r--r-- 1 entropy user 424 Oct 17 1997 venix2.readme
-rw-r--r-- 1 entropy user 1058970 Oct 17 1997 venix2s.zip
-rw-r--r-- 1 entropy user 1145720 Oct 17 1997 venix2u.zip
-rw-r--r-- 1 entropy user 332362 Oct 17 1997 vnx2u2u5.zip
--
entropy -- it's not just a good idea, it's the second law.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id TAA11492
for pups-liszt; Wed, 17 Feb 1999 19:33:00 +1100 (EST)
From maximum entropy
<entropy(a)zippy.bernstein.com> Wed Feb 17 18:32:05 1999
Received: from
zippy.bernstein.com (entropy(a)zippy.bernstein.com [206.20.83.202])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id TAA11487
for <pups(a)minnie.cs.adfa.edu.au>; Wed, 17 Feb 1999 19:32:47 +1100 (EST)
Received: (from entropy@localhost)
by zippy.bernstein.com (8.9.1/8.9.1) id DAA24878;
Wed, 17 Feb 1999 03:32:05 -0500 (EST)
Date: Wed, 17 Feb 1999 03:32:05 -0500 (EST)
Message-Id: <199902170832.DAA24878(a)zippy.bernstein.com>
From: maximum entropy <entropy(a)zippy.bernstein.com>
To: sms(a)moe.2bsd.com
CC: pups(a)minnie.cs.adfa.edu.au
In-reply-to: <199902170515.VAA23159(a)moe.2bsd.com> (sms(a)moe.2bsd.com)
Subject: Re: 2.9BSD: mbuf.h
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Date: Tue, 16 Feb 1999 21:15:02 -0800 (PST)
From: "Steven M. Schultz" <sms(a)moe.2bsd.com>
I believe the 2.9-Seismo update is in the PUPS archive (should be
on the CD but my memory isn't ECC these days ;-)). It's a fairly
painful upgrade process because it changes the a.out header format
for overlaid processes (goes from 7 to 15 overlays). If you're not
real careful you'll have (as I did ;-)) a real mess: can't finish
the upgrade because the old kernel doesn't support the new overlaid
processes but you can't build a new kernel because doing so needs
those processes. Something like that. It was "interesting" ;)
Sounds like fun. Any hints on the correct upgrade path to avoid this
lossage?
Better yet, would you be willing and able to upload a disk image or
tar file of an upgraded system to the PUPS archive (or directly to me
if it's not of general interest), so I could use that as a starting
point?
Cheers,
entropy
--
entropy -- it's not just a good idea, it's the second law.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id TAA11533
for pups-liszt; Wed, 17 Feb 1999 19:43:19 +1100 (EST)
From maximum entropy
<entropy(a)zippy.bernstein.com> Wed Feb 17 18:42:40 1999
Received: from
zippy.bernstein.com (entropy(a)zippy.bernstein.com [206.20.83.202])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id TAA11527
for <pups(a)minnie.cs.adfa.oz.au>; Wed, 17 Feb 1999 19:43:06 +1100 (EST)
Received: (from entropy@localhost)
by zippy.bernstein.com (8.9.1/8.9.1) id DAA24887;
Wed, 17 Feb 1999 03:42:40 -0500 (EST)
Date: Wed, 17 Feb 1999 03:42:40 -0500 (EST)
Message-Id: <199902170842.DAA24887(a)zippy.bernstein.com>
From: maximum entropy <entropy(a)zippy.bernstein.com>
To: pups(a)minnie.cs.adfa.oz.au
Subject: 2.11BSD, non-split i/d issues
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
As already mentioned in previous messages, I'm working on getting
2.9BSD onto a Pro 350. I'm using 2.9BSD as a starting point because
it claims to support machines without split i/d. The 350 uses the
F-11 chipset, which I have read does not support split i/d.
I would prefer to use 2.11BSD because I understand it's still actively
used, and not as buggy as 2.9. But everything I've read about 2.11BSD
says that it needs split i/d to run. Can anyone give me more detail
about this? Was support for machines without split i/d removed from
the kernel, or is it just that some of the programs are too big to fit
in a single 64k segment?
--
entropy -- it's not just a good idea, it's the second law.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id BAA12587
for pups-liszt; Thu, 18 Feb 1999 01:36:09 +1100 (EST)
From Ken Wellsch <kcwellsc(a)math.uwaterloo.ca> Thu
Feb 18 00:35:30 1999
Received: from math.uwaterloo.ca (kcwellsc(a)math.uwaterloo.ca
[129.97.216.42])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id BAA12582
for <pups(a)minnie.cs.adfa.oz.au>; Thu, 18 Feb 1999 01:35:58 +1100 (EST)
Received: (from kcwellsc@localhost)
by math.uwaterloo.ca (8.8.8/8.8.8) id JAA12462;
Wed, 17 Feb 1999 09:35:31 -0500 (EST)
From: Ken Wellsch <kcwellsc(a)math.uwaterloo.ca>
Message-Id: <199902171435.JAA12462(a)math.uwaterloo.ca>
Subject: Re: Venix (was Re: 2.9BSD: mbuf.h)
To: entropy(a)zippy.bernstein.com (maximum entropy)
Date: Wed, 17 Feb 1999 09:35:30 -0500 (EST)
Cc: djenner(a)halcyon.com, pups(a)minnie.cs.adfa.oz.au
In-Reply-To: <199902170822.DAA24861(a)zippy.bernstein.com> from "maximum
entropy" at Feb 17, 99 03:22:50 am
Organization: University of Waterloo, Math Faculty Computing Facility (Alumni)
X-Mailer: ELM [version 2.4 PL25]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
| Interesting...I know there's a Venix 1.0 and a Venix 2.0. I thought
| they were both from Venturcom, with 1.0 being for the Pro-350 and 2.0
| for the Pro-380. I never heard of a distinction between Venix/Pro
| vs. Pro/Venix. Then again, I got into this game fairly late...I
| bought my used Pro-350 around 1993 for US$100, with Venix 1.0 already
| installed (also with original install media and docs).
My time playing with Pro's faded out before Venix 2 was available (free)
for me to try. I've played a fair bit with Venix 1.1 on both Pro 350's
and Pro 380's. The Venix 1 series I feel is basically V6 derived while
I understood the Venix 2 series was derived from Sys III.
About a year ago Rick Macklem that did a port to the Pro series mailed
me his "Pro stuff" which included a tape and floppies. I've forgotten
what all is in that stash, but taking a peek at some old mail he mentions:
The stuff I did went out on a Usenix distribution tape
in about 1983/84
and had to be merged into a 2.9BSD distribution. I did generate floppy
sets for a few people, because that was the only easy way to get it
installed. (The first install here was actually done by downloading the
kernel over the serial port talking to the PDP 11 prom (ODS?).)
I had thought his set of patches were in the PUPS archive. In fact I
see the patches under PUPS/Distributions/ucb/2.9-pro350.
-- Ken
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id BAA12654
for pups-liszt; Thu, 18 Feb 1999 01:42:25 +1100 (EST)
From Ken Wellsch <kcwellsc(a)math.uwaterloo.ca> Thu
Feb 18 00:42:05 1999
Received: from math.uwaterloo.ca (kcwellsc(a)math.uwaterloo.ca
[129.97.216.42])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id BAA12649
for <pups(a)minnie.cs.adfa.oz.au>; Thu, 18 Feb 1999 01:42:16 +1100 (EST)
Received: (from kcwellsc@localhost)
by math.uwaterloo.ca (8.8.8/8.8.8) id JAA15916;
Wed, 17 Feb 1999 09:42:06 -0500 (EST)
From: Ken Wellsch <kcwellsc(a)math.uwaterloo.ca>
Message-Id: <199902171442.JAA15916(a)math.uwaterloo.ca>
Subject: Re: 2.11BSD, non-split i/d issues
To: entropy(a)zippy.bernstein.com (maximum entropy)
Date: Wed, 17 Feb 1999 09:42:05 -0500 (EST)
Cc: pups(a)minnie.cs.adfa.oz.au
In-Reply-To: <199902170842.DAA24887(a)zippy.bernstein.com> from "maximum
entropy" at Feb 17, 99 03:42:40 am
Organization: University of Waterloo, Math Faculty Computing Facility (Alumni)
X-Mailer: ELM [version 2.4 PL25]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
| I would prefer to use 2.11BSD because I understand it's still actively
| used, and not as buggy as 2.9. But everything I've read about 2.11BSD
| says that it needs split i/d to run. Can anyone give me more detail
| about this? Was support for machines without split i/d removed from
| the kernel, or is it just that some of the programs are too big to fit
| in a single 64k segment?
Have you been able to acquire the documentation for the DECNA card? I
think that is roughly what it is called. The Pro Ethernet card. A few
old timers like myself and Dan Lanciani talked years ago about running
things on a Pro and no-one seems to know much about this relatively
critical bit of documentation. Again referring to Rick Macklem's
correspondence (I believe I was asking him, again, about these docs):
Well, the short answer is "I'm not sure what
the answers are". At one
point someone mentioned they were putting the Pro stuff into 2BSD, but
I'm not sure if they actually did it. (The guys that used it the most
had it running on a lab of Pro380s at Columbia U. (I think. It's the
one right in NY city.)) His name was Charlie Kim (again, I think?) and
did some stuff to it so that it worked reasonably well on a Pro380, but
I have no idea how you might find him now. (It was a real dog on a Pro350
because it didn't have separate I and D space.)
The rumors we were able to find all pointed to this place and person
WRT documentation for the ethernet card.
-- Ken
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id CAA12725
for pups-liszt; Thu, 18 Feb 1999 02:12:16 +1100 (EST)
From maximum entropy
<entropy(a)zippy.bernstein.com> Thu Feb 18 01:11:36 1999
Received: from
zippy.bernstein.com (entropy(a)zippy.bernstein.com [206.20.83.202])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id CAA12720
for <pups(a)minnie.cs.adfa.oz.au>; Thu, 18 Feb 1999 02:12:06 +1100 (EST)
Received: (from entropy@localhost)
by zippy.bernstein.com (8.9.1/8.9.1) id KAA25176;
Wed, 17 Feb 1999 10:11:36 -0500 (EST)
Date: Wed, 17 Feb 1999 10:11:36 -0500 (EST)
Message-Id: <199902171511.KAA25176(a)zippy.bernstein.com>
From: maximum entropy <entropy(a)zippy.bernstein.com>
To: kcwellsc(a)math.uwaterloo.ca
CC: djenner(a)halcyon.com, pups(a)minnie.cs.adfa.oz.au
In-reply-to: <199902171435.JAA12462(a)math.uwaterloo.ca> (message from Ken
Wellsch on Wed, 17 Feb 1999 09:35:30 -0500 (EST))
Subject: Re: Venix (was Re: 2.9BSD: mbuf.h)
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
From: Ken Wellsch <kcwellsc(a)math.uwaterloo.ca>
Date: Wed, 17 Feb 1999 09:35:30 -0500 (EST)
About a year ago Rick Macklem that did a port to the Pro series mailed
me his "Pro stuff" which included a tape and floppies. I've forgotten
what all is in that stash, but taking a peek at some old mail he mentions:
Would you be able to send images (rx50 teledisk, or plain dd dumps) of
these disks to me or to the archive?
I had thought his set of patches were in the PUPS
archive. In fact I
see the patches under PUPS/Distributions/ucb/2.9-pro350.
Those files aren't 100% complete. Excerpt of a mail I sent last night
to Warren Toomey:
#The instructions in boot.doc are mangled.
#The patches included are reversed, and didn't apply cleanly to one of
#the files (/usr/src/net/sys/sys/machdep.c). Also, it looks like the
#guy that produced that set of changes forgot to include his
#modifications to /usr/src/sys/conf/config, but I managed to hack
#together something that might work.
Then there's the fact that the 2.9 distribution won't even compile,
and the 2.9 upgrade patches are a nightmare...
Maybe I'll just stick to venix :-)
Cheers,
entropy
--
entropy -- it's not just a good idea, it's the second law.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id CAA12848
for pups-liszt; Thu, 18 Feb 1999 02:44:50 +1100 (EST)
From maximum entropy
<entropy(a)zippy.bernstein.com> Thu Feb 18 01:44:04 1999
Received: from
zippy.bernstein.com (entropy(a)zippy.bernstein.com [206.20.83.202])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id CAA12843
for <pups(a)minnie.cs.adfa.oz.au>; Thu, 18 Feb 1999 02:44:40 +1100 (EST)
Received: (from entropy@localhost)
by zippy.bernstein.com (8.9.1/8.9.1) id KAA25215;
Wed, 17 Feb 1999 10:44:04 -0500 (EST)
Date: Wed, 17 Feb 1999 10:44:04 -0500 (EST)
Message-Id: <199902171544.KAA25215(a)zippy.bernstein.com>
From: maximum entropy <entropy(a)zippy.bernstein.com>
To: kcwellsc(a)math.uwaterloo.ca
CC: djenner(a)halcyon.com, pups(a)minnie.cs.adfa.oz.au
In-reply-to: <199902171435.JAA12462(a)math.uwaterloo.ca> (message from Ken
Wellsch on Wed, 17 Feb 1999 09:35:30 -0500 (EST))
Subject: Re: Venix (was Re: 2.9BSD: mbuf.h)
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
From: Ken Wellsch <kcwellsc(a)math.uwaterloo.ca>
Date: Wed, 17 Feb 1999 09:35:30 -0500 (EST)
About a year ago Rick Macklem that did a port to the Pro series mailed
me his "Pro stuff" which included a tape and floppies. I've forgotten
what all is in that stash, but taking a peek at some old mail he mentions:
Would you be able to send images (rx50 teledisk, or plain dd dumps) of
these disks to me or to the archive?
I had thought his set of patches were in the PUPS
archive. In fact I
see the patches under PUPS/Distributions/ucb/2.9-pro350.
Those files aren't 100% complete. Excerpt of a mail I sent last night
to Warren Toomey:
#The instructions in boot.doc are mangled.d
#The patches included are reversed, and didn't apply cleanly to one of
#the files (/usr/src/net/sys/sys/machdep.c). Also, it looks like the
#guy that produced that set of changes forgot to include his
#modifications to /usr/src/sys/conf/config, but I managed to hack
#together something that might work.
Then there's the fact that the 2.9 distribution won't even compile,
and the 2.9 upgrade patches are a nightmare...
Maybe I'll just stick to venix :-)
Cheers,
entropy
--
entropy -- it's not just a good idea, it's the second law.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id DAA12922
for pups-liszt; Thu, 18 Feb 1999 03:12:05 +1100 (EST)
From maximum entropy
<entropy(a)zippy.bernstein.com> Thu Feb 18 02:11:24 1999
Received: from
zippy.bernstein.com (entropy(a)zippy.bernstein.com [206.20.83.202])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id DAA12917
for <pups(a)minnie.cs.adfa.oz.au>; Thu, 18 Feb 1999 03:11:54 +1100 (EST)
Received: (from entropy@localhost)
by zippy.bernstein.com (8.9.1/8.9.1) id LAA25258;
Wed, 17 Feb 1999 11:11:24 -0500 (EST)
Date: Wed, 17 Feb 1999 11:11:24 -0500 (EST)
Message-Id: <199902171611.LAA25258(a)zippy.bernstein.com>
From: maximum entropy <entropy(a)zippy.bernstein.com>
To: kcwellsc(a)math.uwaterloo.ca
CC: pups(a)minnie.cs.adfa.oz.au
In-reply-to: <199902171442.JAA15916(a)math.uwaterloo.ca> (message from Ken
Wellsch on Wed, 17 Feb 1999 09:42:05 -0500 (EST))
Subject: Re: 2.11BSD, non-split i/d issues
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
From: Ken Wellsch <kcwellsc(a)math.uwaterloo.ca>
Date: Wed, 17 Feb 1999 09:42:05 -0500 (EST)
Have you been able to acquire the documentation for the DECNA card? I
I haven't looked for it. The DECNA is optional, and my Pro doesn't
have it. All Pro's came with an AUI port, but without the card it
doesn't do anything.
--
entropy -- it's not just a good idea, it's the second law.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id DAA12934
for pups-liszt; Thu, 18 Feb 1999 03:12:18 +1100 (EST)
From "David C. Jenner"
<djenner(a)halcyon.com> Thu Feb 18 02:11:12 1999
Received: from
smtp04.nwnexus.com (smtp04.nwnexus.com [206.63.63.52])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id DAA12927
for <pups(a)minnie.cs.adfa.oz.au>; Thu, 18 Feb 1999 03:12:08 +1100 (EST)
Received: from halcyon.com (66-a-usw.rb1.blv.nwnexus.net [206.63.251.66])
by smtp04.nwnexus.com (8.8.8/8.8.8) with ESMTP id IAA21063;
Wed, 17 Feb 1999 08:11:33 -0800 (PST)
Message-ID: <36CAEA1F.D5D7C838(a)halcyon.com>
Date: Wed, 17 Feb 1999 08:11:12 -0800
From: "David C. Jenner" <djenner(a)halcyon.com>
Reply-To: djenner(a)halcyon.com
X-Mailer: Mozilla 4.5 [en] (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: Ken Wellsch <kcwellsc(a)math.uwaterloo.ca>
CC: maximum entropy <entropy(a)zippy.bernstein.com>, pups(a)minnie.cs.adfa.oz.au
Subject: Re: Venix (was Re: 2.9BSD: mbuf.h)
References: <199902171435.JAA12462(a)math.uwaterloo.ca>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
I haven't tried the 2.9 stuff at all on a Pro. I have had it
running on an 11/23+ (w/binary license) for 10 years. The
problem is the networking, as you have found.
Venix/Pro 1.1 and 2.0 run just fine on the Pro 380, and it's
pretty painless to install. I have distribution disks for
Pro/Venix 1.1, but the install disk has apparently been
overwritten with the 2.0 installation disk. And my distribution
for 2.0 is missing a couple of original disks; I have copies of
those disks, but they get read errors.
I guess the 2.9 stuff would be interesting if you got it to
work on the Pro, especially if you got networking to work.
I don't have any docs on the DECNA, but they must exist. It's
probably pretty close to the DEQNA.
Dave
Ken Wellsch wrote:
| Interesting...I know there's a Venix 1.0 and a Venix 2.0. I thought
| they were both from Venturcom, with 1.0 being for the Pro-350 and 2.0
| for the Pro-380. I never heard of a distinction between Venix/Pro
| vs. Pro/Venix. Then again, I got into this game fairly late...I
| bought my used Pro-350 around 1993 for US$100, with Venix 1.0 already
| installed (also with original install media and docs).
My time playing with Pro's faded out before Venix 2 was available (free)
for me to try. I've played a fair bit with Venix 1.1 on both Pro 350's
and Pro 380's. The Venix 1 series I feel is basically V6 derived while
I understood the Venix 2 series was derived from Sys III.
About a year ago Rick Macklem that did a port to the Pro series mailed
me his "Pro stuff" which included a tape and floppies. I've forgotten
what all is in that stash, but taking a peek at some old mail he mentions:
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id DAA12957
for pups-liszt; Thu, 18 Feb 1999 03:17:55 +1100 (EST)
The stuff I did went out on a Usenix distribution
tape in about 1983/84
and had to be merged into a 2.9BSD distribution. I did generate floppy
sets for a few people, because that was the only easy way to get it
installed. (The first install here was actually done by downloading the
kernel over the serial port talking to the PDP 11 prom (ODS?).)
I had thought his set of patches were in the PUPS archive. In fact I
see the patches under PUPS/Distributions/ucb/2.9-pro350.
-- Ken From "Steven M. Schultz"
<sms(a)moe.2bsd.com> Thu Feb 18 02:15:01 1999
Received: from moe.2bsd.com
(0(a)MOE.2BSD.COM [206.139.202.200])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id DAA12952
for <pups(a)minnie.cs.adfa.edu.au>; Thu, 18 Feb 1999 03:17:47 +1100 (EST)
Received: (from sms@localhost)
by moe.2bsd.com (8.9.0/8.9.0) id IAA02324;
Wed, 17 Feb 1999 08:15:01 -0800 (PST)
Date: Wed, 17 Feb 1999 08:15:01 -0800 (PST)
From: "Steven M. Schultz" <sms(a)moe.2bsd.com>
Message-Id: <199902171615.IAA02324(a)moe.2bsd.com>
To: entropy(a)zippy.bernstein.com, sms(a)moe.2bsd.com
Subject: Re: 2.9BSD: mbuf.h
Cc: pups(a)minnie.cs.adfa.edu.au
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hi
Sounds like fun. Any hints on the correct upgrade
path to avoid this
lossage?
Oh, it's not _completely_ irrecoverable and is "fun" in a perverse
way.
First go thru all of the executable directories (/bin, /usr/bin,...)
and identify all of the overlaid executables and save copies of them.
Shouldn't be too many but the important one is 'ex'/'vi'. A
number
of programs rely on using 'ex' scripts to edit generated files (the
kernel makefiles are _good_ examples;)), and so on. Having an older
copy of 'ex'/'vi' is the main thing I remember as saving the day.
Better yet, would you be willing and able to upload a
disk image or
tar file of an upgraded system to the PUPS archive (or directly to me
Oh, I have no 2.9 systems - this was all done 10 years ago. The
systems I run now use MSCP/TMSCP devices and 2.9 lacks support
for those.
Steve
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id DAA13020
for pups-liszt; Thu, 18 Feb 1999 03:32:46 +1100 (EST)
From "Steven M. Schultz"
<sms(a)moe.2bsd.com> Thu Feb 18 02:32:00 1999
Received: from moe.2bsd.com
(0(a)MOE.2BSD.COM [206.139.202.200])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id DAA13014
for <pups(a)minnie.cs.adfa.oz.au>; Thu, 18 Feb 1999 03:32:36 +1100 (EST)
Received: (from sms@localhost)
by moe.2bsd.com (8.9.0/8.9.0) id IAA02404;
Wed, 17 Feb 1999 08:32:00 -0800 (PST)
Date: Wed, 17 Feb 1999 08:32:00 -0800 (PST)
From: "Steven M. Schultz" <sms(a)moe.2bsd.com>
Message-Id: <199902171632.IAA02404(a)moe.2bsd.com>
To: entropy(a)zippy.bernstein.com, pups(a)minnie.cs.adfa.oz.au
Subject: Re: 2.11BSD, non-split i/d issues
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hi -
From: maximum entropy
<entropy(a)zippy.bernstein.com>
I would prefer to use 2.11BSD because I understand it's still actively
used, and not as buggy as 2.9. But everything I've read about 2.11BSD
says that it needs split i/d to run. Can anyone give me more detail
about this? Was support for machines without split i/d removed from
the kernel, or is it just that some of the programs are too big to fit
in a single 64k segment?
Oh, support was NOT removed. Non-split executables (magic number
0407 and 0410) will still run.
The kernel will not fit - without split I/D it is impossible to
create a /unix image that fits within a single 64kb (actually 48kb
since the kernel stack takes 1 segment and the 'u' area takes
another) address space.
I actually went thru the exercise once (2.10 era) of creating a bare
bones kernel that would fit in - at least the linker said it would.
That was only done by ripping out lots of stuff - no networking, no
statistics gathering, almost no drivers, etc. Never 'ran' it though
since there seemed to be little point in such a stripped down system.
Even V7 was hard pressed to run on a non-split machine! In fact there
was a paper written about shoehorning V7 onto an 11/40 and the hoops
that needed to be jumped thru. Not sure but that document might be
in the /usr/doc tree of one of the PUPS Distributions hierarchy.
Steven