14 Sep
1997
14 Sep
'97
4:08 a.m.
Mahlzeit
According to Allison J Parent:
<For my 11/34A with 2 RL01 I made with an emulator
a bootable V7-RL01-diskim
<I downloaded it under RT-11 with KSERVE from John Wilson (dunno where I
<ftped it) over a serial line onto the second disk. It took some hours,
<but it worked.
How did you write it to the RL01 and what would it take to write it to rl02
assuming rt/kserve. Did you use guarenteed no bad block media?
I ran kserve on
RT-11 and kermit on my PC (and a 4-wire seriell line
in between). kserve (unlike the other kermits for RT-11) can write directly
with a put to a disk. The RL01 disk pack I used had no bad blocks. This
should the same way work with RL02 disks. In some blocks on the disk pack
should be written, if it has bad blocks. But I don't know which. I didn't
try it with media with bad blocks, because I had only this disk pack free.
(On the other is the RT-11 and my third has a red shock watch.)
Mahlzeit
endergone Zwiebeltuete
--
insanity inside
Received: (from major@localhost)
by minnie.cs.adfa.oz.au (8.8.5/8.8.5) id JAA10961
for pups-liszt; Mon, 15 Sep 1997 09:21:15 +1000 (EST)
X-Authentication-Warning: minnie.cs.adfa.oz.au: major set sender to
owner-pups(a)minnie.cs.adfa.oz.au using -f