5 Mar
1998
5 Mar
'98
8:21 a.m.
<Oh yes it does. Mine is running (with RL02s) as I type this...
<
<I wouldn't exactly describe it as "fast", but it's servicable.
The syste
<(minus man pages) is on dl0: and user directories on dl1:. The system i
Ok a unique build, is that in the archive?
How about using a RQDX3 and rd52 or rd53 as its a bit more room than a
single RL?
<built for a "small machine", which makes a difference to the memory manag
<(no separate I&D spaces), and things like f77 and troff aren't there (nro
F77 is no loss but CC, vi and nroff are a must. Speed is not required.
<> suggest a way to get the images on to the RL02 using RT-11 I'm interest
<> I can kermit the files from the PC so that step is not a problem.
<
<Kermit-11 should do that for you, but watch the bad blocks.
Kermit would be running under RT-11 the all I'd be doing is copying a
tar.z file over or make the detar'd files over to files under rt-11
structures. I need more on genning a bootable image from RT-11.
While I'm comfortable in a lot of systems unix generally is not one
save for user level activity.
The only unix I have running currently is xenix on pro350 and linix
on PC. I can't say how useful either would be to this project.
Allison
Received: (from major@localhost)
by minnie.cs.adfa.oz.au (8.8.5/8.8.5) id SAA19043
for pups-liszt; Thu, 5 Mar 1998 18:58:30 +1100 (EST)
X-Authentication-Warning: minnie.cs.adfa.oz.au: major set sender to
owner-pups(a)minnie.cs.adfa.oz.au using -f
From Stacy Minkin <stacy(a)asia.uznet.net> Thu Mar
5 17:59:48 1998
Received: from harrier.asiasys.com (asia.uznet.net [193.220.92.23])
by minnie.cs.adfa.oz.au (8.8.5/8.8.5) with ESMTP id SAA19038
for <pups(a)minnie.cs.adfa.oz.au>; Thu, 5 Mar 1998 18:58:13 +1100 (EST)
Received: (from stacy@localhost)
by harrier.asiasys.com (8.8.8/8.8.8) id MAA00282
for pups(a)minnie.cs.adfa.oz.au; Thu, 5 Mar 1998 12:59:48 +0500
Date: Thu, 5 Mar 1998 12:59:48 +0500
From: Stacy Minkin <stacy(a)asia.uznet.net>
Message-Id: <199803050759.MAA00282(a)harrier.asiasys.com>
To: pups(a)minnie.cs.adfa.oz.au
Subject: Hardware guru needed!
Sender: owner-pups(a)minnie.cs.adfa.oz.au
Precedence: bulk
Hi dear PUPS!
It is about one week gone from the mome I got
sufficiently powerful PDP-11. Before this I ran LSI-11/02 under RT-11
and couldn't think about unix. Those new machine is the
main reason for joining to this list for me.
It includes: KDF-11 CPU, RQDX3, DHQ11 8 line async option,
TQK70 tape controller, 1.5Mbyte of memory etc. etc.
I also have the complete BSD2.9 source distribution
in tar file and like to run all of the above.
Currently I've started KDF11 and it seems to be ok.
Problems are: It has lots of switches (the same for MSV-11 boards and
RQDX3 and all of that) and have very little docs about
how to set it correctly. When I tried to bring up the KDF with memory
at once KDF said : no memory :-] but it runs ok with
little 32K memory board from LSI-11/2 ! Seems to me that my MSV-11 boards
have wrong starting address settings or something...
Same story with RQDX3 - currently I have no RDx disks so I thought
that boot my system from RX50 is not a bad idea... I've plugged
standard 5 inch floppy to RQDX3 sig. dist. connector labeled "RX50"
and fired up the machine. Got nothing. I tried to investigate
what happens to bootstrap. I've detected that during init of
mscp controller it successfully undergoes steps 1 and 2 ( or maybe even 3)
but in next step it returns 0 in SA and bootstrap waits for eternity
when controller will enter next step... Looks like hardware fault, ha?
Then I tried to check my TQK70 board. It had nothing connected to it,
and I traced it's initialization sequence the same way. IT ALSO RETURNS ZERO
in 3rd or 4th init step!. Can anyone help with the above?
Sincerely yours - Stacy.
Received: (from major@localhost)
by minnie.cs.adfa.oz.au (8.8.5/8.8.5) id WAA19463
for pups-liszt; Thu, 5 Mar 1998 22:38:35 +1100 (EST)
X-Authentication-Warning: minnie.cs.adfa.oz.au: major set sender to
owner-pups(a)minnie.cs.adfa.oz.au using -f