29 Jan
2002
29 Jan
'02
4:53 a.m.
On Sat, 26 Jan 2002, Michael Werner wrote:
Hi there,
I have my PDP11/40 connected to a MicroVAX 2 (running NetBSD/vax
1.5.2) via serial line and want to boot a 2.9BSD or 2.11BSD using the
vtserver software.
When I toggle in vtserver's boot code, the first file is being loaded
correctly by the PDP. Then, following the instructions in vtserver
documentation, the serial line should be used as a serial console - and
some text should appear! And this is the problem: I don't get any output.
When manually sending characters from the PDP, there is no problem.
Okay. If it isn't a problem when you do it by hand it shouldn't be a
problem in the program either.
I've set the serial line characteristics to:
Speed 2400, Character Size 8, Modem Control enabled, and RTS/CTS flow
control disabled. (I've changed these characteristics in many ways with
stty, but still no success...)
Using a break-out-box, I switched RTS/CTS and DTR/CTS flow control on and
off, forced the CTS line to be on, etc., but it still didn't work.
After successfully loading the bootloader via vtserver, the PDP's CPU goes
into an endless loop.
So, my question: Does anybody know what's going wrong here?
Got the source code for that bootstrap?
Johnny
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt(a)update.uu.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol