5 Dec
2015
5 Dec
'15
8:47 p.m.
Ah I gather you are running on rp0 (ie it's mounted as root).
Do the dd from the standalone system or boot from an rk05
On Sat, Dec 5, 2015 at 12:44 PM, Will Senn <will.senn(a)gmail.com> wrote:
On 12/5/15 11:26 AM, Clem Cole wrote:
On Sat, Dec 5, 2015 at 12:03 PM, Will Senn <will.senn(a)gmail.com> wrote:
I am unable to boot from the RP06 disk that I
installed into the boot
block onto via:
dd if=/usr/mdec/hpuboot of=/dev/rp0 count=1
Doing this from memory as couple of issues:
1.) do an ls -l of /dev/*rp* you need to use the raw (character) driver
not the blocked driver
2.) I believe the hp/rp driver is partitioned. Make sure you use the
proper partition.
Clem,
I tried it with the raw device and partition 0. Here are the devices and
my approach:
# ls /dev/*rp*
/dev/rp0
/dev/rp3
/dev/rrp0
/dev/rrp3
# /etc/mount /dev/rp3 /usr
# dd if=/usr/mdec/hpuboot of=/dev/rrp0 count=1 conv=sync
0+1 records in
1+0 records out
or
# dd if=/usr/mdec/hpuboot of=/dev/rrp0 count=1
0+1 records in
0+1 records out
# sync
# sync
# sync
CTRL-E
Simulation stopped, PC: 002306 (MOV (SP)+,177776)
sim> q
Goodbye
TERRA:bostic-v7 wsenn$ pdp11 nboot.ini
PDP-11 simulator V4.0-0 Beta git commit id: 0f43551d
Disabling XQ
Hangs either way!