24 Oct
2017
24 Oct
'17
8:53 p.m.
On 22 October 2017 at 13:00, emanuel stiebler <emu(a)e-bbes.com> wrote:
On 2017-10-22 10:51, Dan Cross wrote:
At one point, I had a copy of a bootable exabyte tape with 4.4-encumbered
4.4BSD hp300 DOC/Options mentions the following:
HP320
Support for old hp320 machines: 16mhz 68020, HP MMU, 16mhz 68881
and VAC. Compiles in support for a VAC, HP MMU, and the 98620A
16-bit DMA channel. Forces the definition of HAVEVAC.
HP350
Support for old hp350 machines: 25mhz 68020, HP MMU, 20mhz 68881
and VAC. Compiles in support for a VAC and the HP MMU. Differs
from HP320 in that it has no support for 16-bit DMA controller.
Forces the definition of HAVEVAC.
HP330
Support for old hp330 (and 318/319) machines: 16mhz 68020, 68551
PMMU
and 16mhz 68881. Compiles in support for PMMU.
HP360
Support for old hp360 (and 340) machines: 25mhz 68030+MMU and 25mhz
68882. Compiles in support for PMMU and 68030. Differs from HP330
in support for 68030 on-chip data cache.
HP370
Support for old hp370 (and current 345/375/400) machines: 33 (50)
mhz
68030+MMU and 33 (50) mhz 68882. Compiles in support for PMMU,
68030
and off-chip physically addressed cache. Differs from 360 in only
one
place, in dealing with flushing the external cache.
HP380
Support for "current" hp380/425 (and 433) machines: 25 (33) mhz
68040
with MMU/FPU. Compiles in support for 68040.
-Henry
installation and source images for SPARC,
specifically sun4c machines, that
I had liberated from somewhere. My understanding was that the reference
hardware at Berkeley was 68030- and 68040-based HP 9000 machines,
Which models exactly?