Re: [pups] bsd2.11 kernel compile

Thank you for your quick and accurate answers. My "junk-box" 11 (jb11.notms.net) is happy and on my local network. For those of you who may be interested the system is built entirely from scrap.. The CPU is from a Decserver 550. It's a j11 (18mhz.) with 1.5 meg of ram. and pdp11/53 proms. I bought the RQDX3 on E-bay. The disk drive was from My ever decreasing pile of MFM drives (rd32) The chassis is home built. (stop laughing it looks pretty good ;-) The power supply is an open frame switcher from a local electronics scrap dealer. I wire-wrapped the power-on reset and line time clock generator circuits. The boards are in a H-9270 (Q-18) backplane with additional lines wrapped to make it Q-22. It sounds like a real kludge! Anybody got a spare BA23? ;-) I loaded the root filesystem with vtserver. Thanks Warren! VTC and vtserver were used to load /usr. I had to strip a lot of stuff from /usr to get it to fit on a single drive. (games doc ingres and man pages) # df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ra0a 9842 2952 6890 30% / /dev/ra0c 26084 14966 11118 57% /usr As soon as I build a copy of Chuck Dickman's ATA board I'll load up everything. joe lang