5 Oct
2007
5 Oct
'07
5:01 a.m.
Well, it looks like this was released before I had a chance to finish my
32v port, not that I was working very hard on it. I have a boot and
memory disk driver working, but haven't started the real device drivers
working yet.
For what it's worth, I started the project with a port of the ACK
compiler. It may be useful. You can find it at
ftp://opensourcedepot.com/minix/cross/minix-cross-0.1.tar.gz. There
also some of my early work at ftp://opensourcedepot.com/32V.
I did get a chance to play with v7/x86 in Bochs. Looks pretty good.
Any plans for the future?
Pat
Jochen Kunz wrote:
On Thu, 4 Oct 2007 19:51:05 +0200
Robert Nordier <rnordier(a)nordier.com> wrote:
In classic porting style, the port includes a 16-
and 32-bit
UNIX-style x86 assembler written from scratch, though the next step
of conjuring pcc to emit 32-bit x86 code was not done.
There is a x86 pcc:
ftp://226.net120.skekraft.net/pcc/
This was imported into NetBSD a few days ago. You can compile most of
NetBSD with this in-tree pcc now.
Alternatively, the system can be fairly readily
run under Bochs or
some other emulator, using the available "demo" image.
What about Xen DomU support? ;-)