10 Apr
2017
10 Apr
'17
3:46 a.m.
You have to remember this is old stuff, so you will have to fight protocol drift.
Simh has issues using pcap and talking to the host is, it's more so a pcap
limitation. I think the newer version has tun/tap support which may be easier to deal
with, although more involved.
My favorite way was using a web server to serve files out. As for getting stuff in, a
simple CGI or like thing for uploading.
Back in 4.3 land, ftp is going to be active mode, there was no nat, no passive mode, so
you'll need to configure accordingly.
How do you have your lan setup? What host OS? Are you trying to access fSit from the same
machine?
In the past I've had to use uuencode/uudecode on a connection to transfer the bare
minimum of a pre-compiled GCC to sparc solaris, so I know this pain.
Also don't forget if you have tty access you can build sz/rz and use Z-modem.
NFS should be present in UWisc, it has many Sun stuff built in. But keep in mind
it's very old, and could easily suffer from odd things like block size issues, akin
to stuff like ancient Sun-100U / Sun-2 had.
On April 10, 2017 1:14:06 AM GMT+08:00, Mary Ann Horton <mah(a)mhorton.net> wrote:
Apologies if this is already on the list somewhere.
What's the best way to transfer files in and out of the simh 4.3BSD
Wisc
version? I can do it with tape files, but it seems like FTP or ssh or
NFS ought to be possible, and none is behaving at first blush.
Also, what's the recommended way to shut down the system? I shutdown
now to single user, then sync a few times, then ^E, but when I boot
again I get fsck errors serious enough to require a manual fsck (which
generally works fine.)
Thanks,
Mary Ann
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.