Re: [TUHS] SCO OpenDesktop 386 2.0.0

Erase the year and replace it with 99 and you can proceed. Or at least I could... Sent from my iPhone On Mar 1, 2017, at 15:06, Arthur Krewat &lt;krewat(a)kilonet.net <mailto:krewat@kilonet.net>> wrote: > In ESXi 5.0, using the updated HBA driver diskette, I got to this > point and it locked up apparently (see below). Gotta love Y2K > > <nhcellemnelfkmhb.png> > > On 3/1/2017 5:45 PM, Josh Good wrote: >> I got it to install successfully, in VMware Server 1.0.2. >> The solution is to boot normally with the "id.dd" floppy image provided >> by Corey Lindsly, with the ISO image also provided by Corey configured >> as IDE 0:1 (first channel, slave), and with a virtual IDE disk (I'm >> using 8 GB of size) as 0:0 (first channel, master). >> >> This setup leads to the already known IDE driver hanging. It's a >> problem with the IDE driver provided by SCO with UnixWare 2.1. So, >> when the install process asks whether you want to use a "HBA diskette", >> load into your PC emulator's virtual floppy drive the updated "HBA >> diskette" image provided by SCO for UnixWare 2.1.3, which is here: >> ftp://ftp.sco.com/pub/UW21/upd213/hba213.img >> >> This will stop the UnixWare 2.1 IDE driver from hanging, and the >> install process will proceed successfully to completion. >> >> It should work equally well in VirtualBox. >> >> Regards, >> >