Re: [TUHS] BBN technical reports?

Yes we do. The first two are about Rand ports. You’ve found the overview by Carl Sunshine, the implementation by Steve Zucker is the next report up on DTIC: https://apps.dtic.mil/sti/pdfs/ADA044201.pdf The TCP User guide report you refer to is about a TCP implementation done by Jack Haverty, which took an implementation in PDP-11 assembler and wrapped it in a NCP Unix shell. Jack has a listing in his attic, but it is not scanned. The problem with this implementation was that it is was all very cramped in the kernel, so he had to reduce disk buffers substantially. As pipes (and Rand ports) use disk buffers to hold pipe data, which get swapped out to disk as needed, he found that his system trashed a lot and effective TCP speeds in his first trials were barely above few dozen byte per second. The report is actually on the TUHS tree: https://www.tuhs.org/cgi-bin/utree.pl?file=BBN-V6/doc (there is also nroff source for Steven Zucker’s report, and other interesting material in that directory - such as a report on pipe performance). The actual V6 implementation that is on that THUS page is not Jack Haverty’s version, but a version done from scratch by Mike Wingfield, using the learning’s of Jack’s work. Mike’s implementation worked quite well and won first prize in a March 1979 tongue-in-cheek TCP4 conformance & interop competition. The BBN report for that version is 4295. Craig Partridge was kind enough to dig it up from the BBN library - I can send you a copy if you like (it was cleared for public release). Although the implementation was done for research purposes (mainly Autodin II security features and simulation), it seems to have had a long life as a stop-gap to keep aging PDP-11’s connected after the switch from NCP to TCP in 1983. Paul