TUHS May 2017

tuhs@tuhs.org

58 participants
45 discussions

Re: [TUHS] The evolution of Unix facilities and architecture

by jnc＠mercury.lcs.mit.edu

> From: Dave Horsfall > Err, isn't that the sticky bit, not the setuid bit? Oh, right you are. I just looked in the code for ptrace(), and assumed that was it. The fix is _actually_ in sys1$exec() (in V6) and sys1$getxfile() (in PWB1 and the MIT system: /* * set SUID/SGID protections, if no tracing */ if ((u.u_procp->p_flag&STRC)==0) { if(ip->i_mode&ISUID) if(u.u_uid != 0) { u.u_uid = ip->i_uid; u.u_procp->p_uid = ip->i_uid; } The thing is, this code is identical in V6, PWB1, and MIT system!? So now I'm wondering - was this really the bug? Or was there some bug in ptrace I don't see, which was the actual bug that's being discussed here. Because is sure looks like this would prevent the exploitation that I described (start an SUID program under the debugger, then patch the code). Or perhaps somehow this fix was broken by some other feature,, and that introduced the exploit? Noel

8 years

Re: [TUHS] The evolution of Unix facilities and architecture

by jnc＠mercury.lcs.mit.edu

> From: "Steve Johnson" > a DEC repairperson showed up to do "preventive maintenance" and managed > to clobber the nascent file system. > Turns out DEC didn't have any permanent file systems on machines that > small... A related story (possibly a different version of this one) which I read (can't remember where, now) was that he trashed the contents of the RS04 fixed-head hard disk, because on DEC OS's, those were only used for swapping. Noel

8 years

Re: [TUHS] C declarations.

by Steve Johnson

Some interesting comments: "You all are missing the point as to what the cost of passing arrays by value or what other languages do" I don't think so. To me the issues is that the model of what it means to compute has changed since the punch-card days. When you submitted a card deck in the early days, you had to include both the function definition and the data--the function was compiled, the data was read, and, for the most part there were no significant side effects (just a printout, and maybe some stuff on mag tape). This was a model that had served mathematics well for centuries, and it was very easy to understand. Functional programming people still like it a lot... However, with the introduction of permanent file systems, a new paradigm came into being. Now, interactions with the computer looked more like database transactions: Load your program, change a few lines, put it back, and then call 'make'. Trying to describe this with a purely functional model leads to absurdities like: file_system = edit( file_system, file_selector, editing_commands ); In fact, the editing commands can change files, create new ones, and even delete files. There is no reasonable way to handle any realistic file systems with this model (let alone the Internet!) In C's early days, we were just getting into the new world. Call by value for arrays would have been expensive or impossible on the machine with just a few kilobytes of memory for program + data. So we didn't do it. Structures were initially handled like arrays, but the compiler chose to make a local copy when passed a structure pointer. This copy was, at one time, in static memory, which caused some problems. Later, it went on the stack. It wasn't much used... This changed when the Blit terminal project was in place. It was just too attractive on a 68000 to write struct pt = { int x; int y } /* when int was 16-bits */ and I made PCC pass small structures like this in registers, like other arguments. I seem to remember a dramatic speedup (2X or so) from doing this... "(did) Dennis / Brian/ Ken regret this design choice? Not that I recall. Of course, we all had bugs in this area. But I think the lack of subscript range checking was a more serious problem than using pointers in the first place. And, indeed, for a few of the pioneers, BCPL had done exactly the same thing. Steve

8 years

C declarations.

by Ron Natalie

Bjarne agrees with you. He put the * (and the &) with the type name to emphasize it is part of the type. This works fine as long as you only use one declaration per statement. The problem with that is that * doesn't really bind to the type name. It binds to the variable. char* cp1, cp2; // cp1 is pointer to char, cp2 is just a char. I always found it confusing that the * is used to indicate an pointer here, where as when you want to change an lvalue to a pointer, you use &. But if we're going to gripe about the evolution of C. My biggest gripe is when they fixed structs to be real types, they didn't also do so for arrays. Arrays and their degeneration to poitners is one of the biggest annoyances in C. > Am I the only one here who thinks that e.g. a char pointer should be > "char* cp1, cp2" instead of "char *cp1, *cp2"? I.e. the fundamental type is "char*", not "char", and to this day I still write:

8 years

Re: [TUHS] C declarations.

by Richard Tobin

> Fortran, for the record, passes nearly everything by reference Sort of. The Fortran 77 standard imposes restrictions that appear to be intended to allow the implementation to pass by value-and-result (i.e. values are copied in, and copied back at return). In particular it disallows aliasing that would allow you to distinguish between the two methods: If a subprogram reference causes a dummy argument in the referenced subprogram to become associated with another dummy argument in the referenced subprogram, neither dummy argument may become defined during execution of that subprogram. http://www.fortran.com/F77_std/rjcnf-15.html#sh-15.9.3.6 -- Richard -- The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336.

8 years

Re: [TUHS] The evolution of Unix facilities and architecture

by jnc＠mercury.lcs.mit.edu

> From: Random832 > Ah. There's the other piece. You start the SUID program under the > debugger, and ... it simply starts it non-suid. *However*, in the > presence of shared text ... you can make changes to the text image > ... which will be reused the *next* time it is started *without* the > debugger. So I actually tried to do this (on a V6 system running on an emulator), after whipping up a tiny test program (which prints "1", and the real and current UIDs): the plan was to patch it to print a different number. However, after a variety of stubbed toes and hiccups (gory details below, if anyone cares), including a semi-interesting issue with the debugger and pure texts), I'm punting: when trying to set a breakpoint in a pure text, I get the error message "Can't set breakpoint", which sort of correlates with the comment in the V6 sig$ptrace(): "write user I (for now, always an error)". So it's not at all clear that the technique we thought would work would, in fact, work - unless people weren't using a stock V6 system, but rather one that had been tweaked to e.g. allow use of debuggers on pure-text programs (including split I+D). It's interesting to speculate on what the 'right' fix would be, if somehow the techique above did work. The 'simple' fix, on systems with a PWB1-line XWRIT flag, would be to ignore SETUID bits when doing an exec() of a pure text that had been modified. But probably 'the' right fix would be to give someone debugging a pure-text program their own private copy of the text. (This would also prevent people who try to run the program from hitting breakpoints while it's being debugged. :-) But anyway, it's clear that back when, when I thought I'd found the bug, I clearly hadn't - which is why when I looked into the source, it looked like it had been 'already' been fixed. (And why Jim G hemmed and hawed...) But I'm kind of curious about that mod in PWB1 that writes a modified pure text back to the swap area when the last process using it exits. What was the thinking behind that? What's the value to allowing someone to patch the in-core pure text, and then save those patches? And there's also the 'other people who try and run a program beind debugged are going to hit breakpoints' issue, if you do allow writing into pure texts... Noel -------- For the gory details: to start with, attempting to run a pure-text program (whether SUID or not) under the debugger produced a "Can't execute {program-name} Process terminated." error message. 'cdb' is printing this error message just after the call to exec() (if that fails, and returns). I modified it to print the error number when that happens, and it's ETXTBSY. I had a quick look at the V6 source, to see if I could see what the problem is, and it seems to be be (in sys1$exec()): if(u.u_arg[1]!=0 && (ip->i_flag&ITEXT)==0 && ip->i_count!=1) { u.u_error = ETXTBSY; goto bad; } What that code does is a little obscure; I'm not sure I understand it. The first term checks to see if the size of the text segment is non-zero (which it is not, in both 0407 and 0410 files). The second is, I think, looking to see if the inode is marked as being in use for a pure text (which it isn't, until later in exec()). The third checks to make sure nobody else is using the file. So I guess this prevents exec() of a file which is already open, and not for a pure text. (Why this is the Right Thing is not instantly clear to me...) Anyway, the reason this fails under 'cdb' is that the debugger already has it open (to be able to read the code). So I munged the debugger to close it before doing the exec(), and then the error went away. Then I ran into a long series of issues, the details of which are not at all interesting, connected with the fact that the version of 'cdb' I was using (one I got off a Tim Shoppa modified V6 disk) doesn't correspond to either of the sources I have for 'cdb'. When I switched to the latest source (so I could fix the issue above), it had some bug where it wouldn't work unless there was a 'core' file. But eventually I kludged it enough to get the 'can't set breakpoints' message, at which point I threw in the towel.

8 years

Re: [TUHS] The evolution of Unix facilities and architecture

by jnc＠mercury.lcs.mit.edu

> From: Clem Cole > it was was originally written for the for the 6th edition FS (which I > hope I have still have the sources in my files) ... > I believe Noel recovered a copy in his files recently. Well, I have _something_. It's called 'fcheck', not 'fsck', but it looks like what we're talking about - maybe it was originally named, or renamed, to be in the same series as {d,i,n}check? But it does have the upper-case error messages... :-) Anyway, here it is: http://ana-3.lcs.mit.edu/~jnc/tech/unix/s1/fcheck.c http://ana-3.lcs.mit.edu/~jnc/tech/unix/man8/fcheck.8 Interestingly, the man page for it makes reference to a 'check' command, which I didn't recall at all; here it is: http://ana-3.lcs.mit.edu/~jnc/tech/unix/s1/check.c http://ana-3.lcs.mit.edu/~jnc/tech/unix/man8/check.8 for those who are interested. > Noel has pointed out that MIT had it in the late 1970s also, probably > brought back from BTL by one of their summer students. I think most of the Unix stuff we got from Bell (e.g. the OS, which is clearly PWB1, not V6) came from someone who was in a Scout unit there in high school, of all bizarre connections! ISTR this came the same way, but maybe I'm wrong. It definitely arrived later than the OS - we'd be using icheck/dcheck for quite a while before it arrived - so maybe it was another channel? The only thing that for sure (that I recall) that didn't come this way was Emacs. Since the author had been a grad student in our group at MIT, I think you all can guess how we got that! Noel

8 years

Re: [TUHS] C declarations.

by Doug McIlroy

> Are there languages that copy arrays in function calls defaultly? > Pascal is an example. Pascal's var convention, where the distinction between value and reference is made once and for all for each argument of each function, is sound. The flexibility of PL/I, where the distinction is made at every call (parenthesize the name to pass an array by value) is finicky, though utterly general. > Where is all that [memory] going to come from if you pass a > large array on a memory-constrained system of specs common back in the > days when C was designed Amusingly, under the customary linkage method in the even earlier days when Fortran was designed, pass-by-reference entailed a big overhead that could easily dominate pass-by-value for small arrays. [In the beginning, when CPUs had only one register, subroutine preambles plugged the reference into every mention of that variable throughout the body of the subroutine. This convention persisted in Fortran, which was designed for a machine with three index registered. Since reference variables were sometimes necessary (think of swap(a,b) for example) they were made standard.] Doug

8 years

Re: [TUHS] The evolution of Unix facilities and architecture

by jnc＠mercury.lcs.mit.edu

> From: Random832 > It seems to me that this check is central to being able to (or not) > modify the in-core image of any process at all other than the one being > traced (say, by attaching to a SUID program that has already dropped > privileges, and making changes that will affect the next time it is > run). Right, good catch: if you have a program that was _both_ sticky and SUID, when the system is idle (so the text copy in the swap area won't get recycled), call up a copy under the debugger, patch it, exit (leaving the patched copy), and then re-run it without the debugger. I'd have to check the handling of patched sticky pure texts - to see if they are retained or not. {Checks code.} Well, the code to do with pure texts is _very_ different between V6 and PWB1. The exact approach above might not work in V6, because the modified (in-core) copy of pure texts are simply deleted when the last user exits them. But it might be possible for a slight variant to work; leave the copy under the debugger (which will prevent the in-core copy from being discarded), and then run it again without the debugger. That might do it. Under PWB1, I'm not sure if any variant would work (very complicated, and I'm fading). There's an extra flag bit, XWRIT, which is set when a pure text is written into; when the last user stops using the in-code pure text, the modified text is written to swap. (It lools like the in-core copy is always discarded when the last user stops using it.) But the check for sticky would probably stop a sticky pure-text being modified? But maybe the approach that seems like it would work under V6 (leave the patched, debugger copy running, and start a new instance) looks like it should work here too. So maybe the sticky thing is irrelevant? On both V6 and PWB1, it just needs a pure text which is SETUID: start under the debugger, patch, leave running, and start a _new_ copy, which will run the patched version as the SUID user. Noel

8 years

Re: [TUHS] The evolution of Unix facilities and architecture

by jnc＠mercury.lcs.mit.edu

> From: Clem Cole > I said -- profil - I intended to say ptrace(2) Is that the one where running an SUID program under the debugger allowed one to patch the in-core image of said program? If so, I have a story, and a puzzle, about that. A couple of us, including Jim Gettys (later of X-windows fame) were on out way out to dinner one evening (I don't recall when, alas, but I didn't meet him until '80 or so), and he mentioned this horrible Unix security bug that had just been found. All he would tell me about it (IIRC) was that it involved ptrace. So, over dinner (without the source) I figured out what it had to be: patching SUID programs. So I asked him if that was what it was, and I don't recall his exact answer, but I vaguely recall he hemmed and hawed in a way that let me know I'd worked it out. So when we got back from dinner, I looked at the source to our system to see if I was right, and.... it had already been fixed! Here's the code: if (xp->x_count!=1 || xp->x_iptr->i_mode&ISVTX) goto error; Now, we'd been running that system since '77 (when I joined CSR), without any changes to that part of the OS, so I'm pretty sure this fix pre-dates your story? So when I saw your email about this, I wondered 'did that bug get fixed at MIT when some undergrad used it to break in' (I _think_ ca. '77 is when they switched from an OS called Delphi on the -11/45 used for the undergrad CS programming course - I _think_ they switched that machine from Delphi to Unix), or did it come with PWB1? (Like I said, that system was mostly PWB1.) So I just looked in the PWB1 sources, and... there it is, the _exact_ same fix. So we must have got it from PWB1. So now the question is: did the PWB guys find and fix this, and forget to tell the research guys? Or did they tell them, and the research guys blew them off? Or what? Noel

8 years

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

TUHS May 2017