In atricle by Danny R. Brown:
> 3.If Keith has not yet found a way to transfer files I have a set of
> PD tape utilities which work quite well. As I recall I installed
> TSXTCP (from shop.pdp.kent.edu) and FTP'd the files from my PC to my
> 11/73, built the tapes with the aforementioned utilities (TK-50, but
> I believe most any style will do), booted up and installed everything
> in about three days.
>
> I'm sure that I posted a pointer to the ftp site for the tape utils
> on this sig, or maybe e-mailed them to someone who requested. I'm
> still not home much but drop me a line and I'll dig out the notes,
> names, and etc., in the next few days...
> cheers!
Danny, I just looked thru the archive and, no, you didn't post any
detais. So, would you drop a line with the info when you get back.
Thanks again!
Warren
I'm forwarding this on from Keith Huff, who wants to know how to load the
PDP UNIX images from henry onto a machine. As I've never used a PDP OS
apart from Unix, can someone pass on trick and techniques to get tape or
disk images from henry.cs.adfa.oz.au onto a PDP-11?
Thanks,
Warren
----- Forwarded message from kshuff(a)fast.net -----
From: kshuff(a)fast.net
Subject: PDP Unix
Hi Warren,
I have visited your FTP site and have a question. The only piece of
equipment I have connected to the net is a PC, so upon downloading a copy of
Unix, how do I go about getting it over to the PDP, or do I have to have it
connected to the net. If the latter, could you give me some guidance on how
this would be accomplished. Thanks again.
-Keith S. Huff
----- End of forwarded message from kshuff(a)fast.net -----
>From "Danny R. Brown" <sysyphus(a)crl.com> Fri Aug 23 13:38:27 1996
Received: from mail.crl.com (mail.crl.com [165.113.1.22]) by minnie.cs.adfa.oz.au (8.6.13/8.3) with SMTP id NAA07876; Fri, 23 Aug 1996 13:42:50 +0959
Received: from crl14.crl.com by mail.crl.com with SMTP id AA23923
(5.65c/IDA-1.5 for <oldunix(a)minnie.cs.adfa.oz.au>); Thu, 22 Aug 1996 20:41:44 -0700
Received: by crl14.crl.com id AA13195
(5.65c/IDA-1.5); Thu, 22 Aug 1996 20:38:28 -0700
Date: Thu, 22 Aug 1996 20:38:27 -0700 (PDT)
From: "Danny R. Brown" <sysyphus(a)crl.com>
To: Warren Toomey <wkt(a)csadfa.cs.adfa.oz.au>
Cc: PDP Unix Preservation <oldunix(a)minnie.cs.adfa.oz.au>
Subject: Re: PDP Unix - how to load?
In-Reply-To: <9608120357.AA22166@dolphin>
Message-Id: <Pine.SUN.3.91.960822202356.12906A-100000(a)crl14.crl.com>
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Mon, 12 Aug 1996, Warren Toomey wrote:
> Date: Mon, 12 Aug 1996 13:57:30 +1000 (EST)
> From: Warren Toomey <wkt(a)csadfa.cs.adfa.oz.au>
> To: PDP Unix Preservation <oldunix(a)minnie.cs.adfa.oz.au>
> Subject: PDP Unix - how to load?
>
> I'm forwarding this on from Keith Huff, who wants to know how to load the
> PDP UNIX images from henry onto a machine. As I've never used a PDP OS
> apart from Unix, can someone pass on trick and techniques to get tape or
> disk images from henry.cs.adfa.oz.au onto a PDP-11?
>
> Thanks,
> Warren
> ----- Forwarded message from kshuff(a)fast.net -----
> From: kshuff(a)fast.net
> Subject: PDP Unix
> Hi Warren,
>
> I have visited your FTP site and have a question. The only piece of
> equipment I have connected to the net is a PC, so upon downloading a copy of
> Unix, how do I go about getting it over to the PDP, or do I have to have it
> connected to the net. If the latter, could you give me some guidance on how
> this would be accomplished. Thanks again.
>
> -Keith S. Huff
> ----- End of forwarded message from kshuff(a)fast.net -----
>
Keith, Warren, et al.....
1.Sorry that I've been away from this SIG after such a hectic beginning
last winter. I got sucked up in the Olympics here in Atlanta and am only
now returning to "normal" life. You boys down under might invest in a
good pair of hip boots- its coming your way ;-)
2.Thanks to all of you for your help in getting me up and running.
3.If Keith has not yet found a way to transfer files I have a set of
PD tape utilities which work quite well. As I recall I installed
TSXTCP (from shop.pdp.kent.edu) and FTP'd the files from my PC to my
11/73, built the tapes with the aforementioned utilities (TK-50, but
I believe most any style will do), booted up and installed everything
in about three days.
I'm sure that I posted a pointer to the ftp site for the tape utils
on this sig, or maybe e-mailed them to someone who requested. I'm
still not home much but drop me a line and I'll dig out the notes,
names, and etc., in the next few days...
cheers!
*************************************************************************
* A Personal Message from * BASILISK *
* Danny R. Brown * "Try our other fine flavors!" *
* ( sysyphus(a)crl.com ) * (404) 392-1691 *
* Pager:(404)397-0516 * LYNC host mode *
*************************************************************************
All,
In my continuing quest to find out if PDP-11 UNIX licenses are
available and how to get them, I've been chatting with Mike Tilson, a VP at
SCO. I include his email below, with permission. The summary is that SCO
don't have any licenses for PDP-11 UNIX; if you want a license, you should
join an organisation with an existing UNIX source license so as to be
covered by it.
Cheers,
Warren
From: Michael Tilson <mike(a)sco.COM>
Subject: Re: PDP-11 Unix Licenses?
[The question posed to Mike was: could cheap PDP UNIX licenses be make
available to people who don't have licenses?]
As a former PDP-11 UNIX Fifth Edition user and systems programmer I'd
personally be pleased to see this happen. There are some obstacles.
The UNIX intellectual property has great value (SCO gave up nearly 20%
of its equity plus future cash payments to obtain it.) The
intellectual property traces back in unbroken lineage to PDP-11 UNIX.
Source licensing has always been very carefully managed, as this deals
with the core of the intellectual property. Even when source was
licensed to universities "for free" there was a large agreement signed
by a university corporate authority, and the agreement had teeth in it.
The Lions book was something we all wanted to see published, but it
still took considerable careful legal review, and that was just to
publish the kernel plus a limited set of device drivers. The full
source code (utilities, libraries, compilers, etc.) would be a bigger
matter. (Example: I believe the algorithms in the "diff" command for
optimal differencing are still unequaled in other commercial systems,
despite their age.) And the later the version (e.g. Seventh Edition
rather than Sixth Edition) the more concerned we would be.
When Dion Johnson raised this matter internally a while back I
commented that I'd like to see it happen, but that I understood all of
the above concerns. I wondered at that time whether the task of
resurrecting this historical item wasn't something that could be done
in cooperation with universities who already possessed the appropriate
source licenses. Would that method work for you? I note that you
appear to be associated with the right sort of institution.
So in summary I'd like to see this happen, I'll be helpful if I can,
and I would caution that the probability is considerably lower than for
the Lions book. Dion has been doing a good job of representing your
interests, by the way.
It sounds like all the interested parties are today associated with
institutions that would allow them the necessary access for this
history project. I've sometimes thought that I'd like to have a
PDP-11/45 running the old UNIX myself. (The hardware can no doubt be
found in some scrapyard, the trick is floorspace and power of course.
Seems like a lot of effort to get a computer with two orders of
magnitude less capacity than my laptop computer... :-))
Please make sure everyone understands that in principle we'd like to be
helpful, but we're not dealing with a dead product, we're dealing with
an earlier version of what is today a very much alive and growing
product -- an intellectual asset of extremely high value. This means
everyone moves very cautiously, as intellectual property law can be a
minefield. There is no doubt that a license with enough teeth could be
written, and if we had such a license the purpose would not be to
charge historians or hobbiests a lot of money. The real obstacle is
the care and effort that must go into creating a licensing program, and
I think the business reality is that we're unlikely to have enough idle
cycles available to create the program for you. (Not my department,
though -- maybe Dion will be able to push it through, who knows?)
// Michael Tilson, CIO
// SCO, +1-408-429-4889
