February 2023 - COFF - www.tuhs.org

Re: [TUHS] Re: history of community help for unix users everywhere

by Dan Cross

[TUHS to Bcc: and +COFF] On Wed, Feb 8, 2023 at 3:50 PM Warner Losh <imp(a)bsdimp.com> wrote: > [snip] > The community aspect of open source was there in spades as well, with people helping other people and sharing fixes. But it was complicated by restrictive license agreements and somewhat (imho) overzealous protection of 'rights' at times that hampered things and would have echos in later open source licenses and attitudes that would develop in response. Even though the term 'open source' wasn't coined until 1998, the open source ethos were present in many of the early computer users groups, not least the unix ones. Don't forget SHARE! Honestly, I think the IBM mainframe community doesn't get its due. There was actually a lot of good stuff there. > USENET amplified it, plus let in the unwashed masses who also had useful contributions (in addition to a lot of noise)... then things got really crowded with noise when AOL went live... And I'm sure there's a number of other BBS and/or compuserve communities I'm giving short-shrift here because I wasn't part of them in real time. The phenomenon of "September" being the time when all the new undergrads got their accounts and discovered USENET and the shenanigans that ensued was well-known. Eternal September when AOL got connected was a serious body blow. As for BBSes...I'd go so far as to say that the BBS people were the AOL people before the AOL people were the AOL people. A takeaway from both was that communities with established norms but no way beside social pressure to enforce them have a hard time scaling. USENET worked when the user population was small and mostly amenable to a set of shared goals centered around information exchange (nevermind the Jim Flemings and other well-known cranks of the world). But integrating someone into the fold took effort both on the community's part as well as the user; when it wasn't obvious that intrinsic motivation was required, or hordes of users just weren't interested, it didn't work very well. I think this is something we see over and over again with social networks. - Dan C.

2 years, 2 months

1
0
0 0

VAX/VMS 4.4 Source Listing?

by segaloco

Good morning all, I was wondering if anyone in this group was aware of any known preservation of VAX/VMS 4.4 source code? Just saw this on eBay: https://www.ebay.com/itm/195582389147?hash=item2d899e6b9b:g:neYAAOSwmQJj3EkH I certainly don't have the equipment for this in my arsenal, but at the same time, if this represents long-lost source code, I'd happy try and nab it and then get it to someone who can do the restoration work from this. Thoughts? - Matt G.

2 years, 2 months

4
3
0 0

Re: [TUHS] Re: Proper use of TUHS (was Re: Typesetter C compiler)

by Tomasz Rola

On Fri, Feb 03, 2023 at 06:36:34AM +0000, Lars Brinkhoff wrote: > Dan Cross wrote: > > So, the question becomes: what _is_ that forum, if such a thing > > exists at all? > > Some options: > > - Cctalk email list. (cc-ed to coff, of coffse...) I use to hang out on IBM-MAIN mailing list, too. While they are, mostly, dealing with modern mainframes and current problems, they also occasionally mention old story or two. Actually, since mainframe is such a living fossil thing, the whole talk sometimes feels as if it was about something upgraded continuously from the 1960-ties. Most of it is uncomprehensible to me (never had proper mainframe training, or unproper one, and they deal with stuff in unique way, have their own acronyms for things, there are some intro books but there is not enough time*energy), but also a bit educating - a bit today, a bit next week etc. > - ClassicCMP Discord. > - Retrocomputingforum.com. > - Various Facebook groups. Web stuff, requiring Javascript to work, ugh, ugh-oh. Mostly, it boils down to the fact that one cannot easily curl the text from those other places (AFAICT). So it is hard to awk this text into mbox format and read it comfortably. -- Regards, Tomasz Rola -- ** A C programmer asked whether computer had Buddha's nature. ** ** As the answer, master did "rm -rif" on the programmer's home ** ** directory. And then the C programmer became enlightened... ** ** ** ** Tomasz Rola mailto:tomasz_rola@bigfoot.com **

2 years, 2 months

1
0
0 0

converting lousy scans of pdfs into something more useable

by Will Senn

All, I thought I would post something here that wasn't DOA over on tuhs and see if it would fly here instead. I have been treating coff as the destination for the place where off-topic tuhs posts go to die, but after the latest thread bemoaning a place to go for topics tangential to unix, I thought I'd actually start a coff thread! Here goes... I read a tremendous number of documents from the web, or at least read parts of them - to the tune of maybe 50 or so a week. It is appalling to me in this era that we can't get better at scanning. Be that as it may, the needle doesn't seem to have moved appreciably in the last decade or so and it's a little sad. Sure, if folks print to pdf, it's great. But, if they scan a doc, not so great, even today. Rather than worry about the scanning aspects, I am more interested in what to do with those scans. Can they be handled in such a way as to give them new life? Unlike the scanning side of things, I have found quite a bit of movement in the area of being able to work with the pdfs and I'd really like to get way better at it. If I get a bad scanned pdf, if I can make it legible on screen, legible on print, and searchable, I'm golden. Sadly, that's way harder than it sounds, or, in my opinion, than it should be. I recently put together a workflow that is tenable, if time consuming. If your interested in the details, I've shared them: https://decuser.github.io/pdfs/2023/02/01/pdf-cleanup-workflow.html In the note, I leverage a lot of great tools that have significantly improved over the years to the point where they do a great job at what they do. But, there's lots of room for improvement. Particularly in the area of image tweaking around color and highlights and such. The note is mac-centric in that I use a mac, otherwise, all of the tools work on modern *nix and with a little abstract thought, windows too. In my world, here's what happens: * find a really interesting topic and along the way, collect pdfs to read * open the pdf and find it salient, but not so readable, with sad printability, and no or broken OCR * I begin the process of making the pdf better with the aforementioned goals aforethought The process in a nutshell: 1. Extract the images to individual tiffs (so many tools can't work with multi-image tiffs) * pdfimages from poppler works great for this 2. Adjust the color (it seems impossible to do this without a batch capable gui app) * I use Photoscape X for this - just click batch and make adjustments to all of the images using the same settings 3. Resize the images - most pdfs have super wonky sizes * I use convert from imagemagick for this and I compress the tiffs while I'm converting them 4. Recombine the images into a multi-tiff image * I use tiffcp from libtiff for this 5. OCR the reworked image set * I use tesseract for this - It's gotten so much better it's ridiculous This process results in a pdf that meets the objectives. It's not horribly difficult to do and it's not horribly time consuming. It represents many, many attempts to figure out this thorny problem. I'd really like to get away from needing Photoscape X, though. Then I could entirely automate the workflow in bash... The problem is that the image adjustments are the most critical - image extraction, resize, compression, recombining images, ocr (I still can't believe it), and outputting a pdf are now taken care of by command line tools that work well. I wouldn't mind using a gui to figure out some color setting (Grayscale, Black and White, or Color) and increase/decrease values for shadows and highlights if those could then be mapped to command line arguments of a tool that could apply them, though. Cuz, then the workflow could be, extract a good representative page as image, open it, figure out the color settings, and then use those settings with toolY as part of the scripted workflow. Here are the objectives for easy reference: 1. The PDF needs to be readable on a decent monitor (zooming in doesn't distort the readability, pixelation that is systematic is ok, but not preferred). Yes, I know it's got a degree of subjectivity, but blobby, bleeding text is out of scope! 2. The PDF needs to print with a minimum of artifact (weird shadows, bleeding and blob are out). It needs to be easy to read. 3. The PDF needs to be searchable with good accuracy (generally, bad scans have no ocr, or ocr that doesn't work). Size is a consideration, but depends greatly on the value of the work. My own calculus goes like this - if it's modern work, it should be way under 30mbs. If it's print to pdf, it should be way under 10mb (remember when you thought you'd never use 10mb of space... for all of your files and the os). If it is significant and rare, less than 150mbs can work. Obviously, this is totally subjective, your calculus is probably quite different. The reason this isn't posted over in pdf.scans.discussion is that even if there were such a place, it'd be filled with super technical gibberish about color depth and the perils of gamma radiation or somesuch. We, as folks interested in preserving the past have a more pragmatic need for a workable solution that is attainable to mortals. So, with that as a bit of background, let me ask what I asked previously in a different wayon tuhs, here in coff - what's your experience with using sad pdfs? Do you just live with them as they are, or do you try to fix them and how, or do you use a workflow and get good results? Later, Will

2 years, 2 months

4
4
0 0

Re: move to COFF Re: [TUHS] Re: Proper use of TUHS (was Re: Typesetter C compiler)

by Will Senn

Oh, and of course I would cc the old address! Reply on the correct COFF address <coff(a)tuhs.org> Sheesh. On 2/3/23 11:26 AM, Will Senn wrote: > We're in COFF territory again. I am enjoying the conversation, but > let's self monitor. Perhaps, a workflow for this is that when we drift > off into non-unix history discussion, we cc: COFF and tell folks to > continue there? As a test I cced it on this email, don't reply all to > this list. Just let's talk about it over in coff. If you aren't on > coff join it. > > If you aren't sure or think most folks on the list want to discuss it. > Post it on COFF, if you don't get any traction, reference the COFF > thread and tease it in TUHS. > > This isn't at all a gripe - I heart all of our discussions, but I > agree that it's hard to keep it history related here with no outlet > for tangential discussion - so, let's put coff to good use and try it > for those related, but not quite discussions. > > Remember, don't reply to TUHS on this email :)! > > - will > > On 2/3/23 11:11 AM, Steve Nickolas wrote: >> On Fri, 3 Feb 2023, Larry McVoy wrote: >> >>> Some things will never go away, like keep your fingers off of my L1 >>> cache lines. I think it's mostly lost because of huge memories, but >>> one of the things I love about early Unix is how small everything was. >>> Most people don't care, but if you want to go really fast, there is no >>> replacement for small. >>> >>> Personally, I'm fine with some amount of "list about new systems where >>> we can ask about history because that helps us build those new >>> systems". >>> Might be just me, I love systems discussions. >> >> I find a lot of my own stuff is like this - kindasorta fits and >> kindasorta doesn't for similar reasons. >> >> (Since a lot of what I've been doing lately is creating a >> SysV-flavored rewrite of Unix from my own perspective as a >> 40-something who actually got most of my experience coding for >> 16-bits and MS-DOS, and speaks fluent but non-native C. I'm sure it >> comes out in my coding style.) >> >> -uso. >

2 years, 2 months

1
0
0 0

Re: converting lousy scans of pdfs into something more useable

by Bakul Shah

On Feb 3, 2023, at 8:26 AM, Will Senn <will.senn(a)gmail.com> wrote: > > I can't seem to get away from having to highlight and mark up the stuff I read. I love pdf's searchability of words, but not for quickly locating a section, or just browsing and studying them. I can flip pages much faster with paper than an ebook it seems :). You can annotate, highlight and markup pdfs. There are apps for that though I’m not very familiar with them as I don’t markup even paper copies. On an iPad you can easily annotate pdfs with an apple pencil.

2 years, 2 months

1
0
0 0

Re: converting lousy scans of pdfs into something more, useable

by Will Senn

> From: Dennis Boone <drb(a)msu.edu> > > * Don't use JPEG 2000 and similar compression algorithms that try to > re-use blocks of pixels from elsewhere in the document -- too many > errors, and they're errors of the sort that can be critical. Even if > the replacements use the correct code point, they're distracting as > hell in a different font, size, etc. I wondered about why certain images were the way they were, this probably explains a lot. > * OCR-under is good. I use `ocrmypdf`, which uses the Tesseract engine. Thanks for the tips. > * Bookmarks for pages / table of contents entries / etc are mandatory. > Very few things make a scanned-doc PDF less useful than not being able > to skip directly to a document indicated page. I wish. This is a tough one. I generally sacrifice ditching the bookmarks to make a better pdf. I need to look into extracting bookmarks and if they can be re-added without getting all wonky. > * I like to see at least 300 dpi. Yes, me too, but I've found that this often results in too big (when fixing existing), if I'm creating, they're fine. > * Don't scan in color mode if the source material isn't color. Grey > scale or even "line art" works fine in most cases. Using one pixel > means you can use G4 compression for colorless pages. Amen :). > > * Do reduce the color depth of pages that do contain color if you can. > The resulting PDF can contain a mix of image types. I've worked with > documents that did use color where four or eight colors were enough, > and the whole document could be mapped to them. With care, you _can_ > force the scans down to two or three bits per pixel. > * Do insert sensible metadata. > > * Do try to square up the inevitably crooked scans, clean up major > floobydust and whatever crud around the edges isn't part of the paper, > etc. Besides making the result more readable, it'll help the OCR. I > never have any luck with automated page orientation tooling for some > reason, so end up just doing this with Gimp. Great points. Thanks. -will

2 years, 2 months

1
0
0 0

Early programs that were run more than once?

by Dave Horsfall

That was the title of a sidebar in Australia's "Silicon Chip" electronics magazine this month, and referred to the alleged practice of running scientific and engineering programs many times to ensure consistent output, as hardware error checks weren't the best in those days (bit-flips due to electrical noise etc). Anyway, the mag is seeking corroboration on this (credit given where due, of course); I find it a bit hard to believe that machines capable of running complex programs did not have e.g. parity checking... Thanks. -- Dave

2 years, 2 months

1
0
0 0

Re: [TUHS] Algol rules: was something about Rust is not C++

by Steffen Nurpmeso

Will Senn wrote in <3808a35c-2ee0-2081-4128-c8196b4732c0(a)gmail.com>: |Well, I just read this as Rust is dead... here's hoping, but seriously, |if we're gonna go off and have a language vs language discussion, I |personally don't think we've had any real language innovation since |Algol 60, well maybe lisp... sheesh, surely we're in COFF territory. It has evangelists on all fronts. ..Yes it was only that while i was writing the message i reread about Vala of the GNOME project, which seems to be a modern language with many beneficial properties still, growing out of a Swiss University (is that a bad sign to come from Switzerland and more out of research), and it had support of Ubuntu and many other parts of the GNOME project. Still it is said to be dead. I scrubbed that part of my message. But maybe thus a "dead" relation in between the lines remained. Smalltalk is also such a thing, though not from Switzerland. An Ach! on the mystery of human behaviour. Or, like the wonderful Marcel Reich-Ranicki said, "Wir sehen es betroffen, den Vorhang zu, und alle Fragen offen" ("Concerned we see, the curtain closed, and all the Questions open"). --steffen | |Der Kragenbaer, The moon bear, |der holt sich munter he cheerfully and one by one |einen nach dem anderen runter wa.ks himself off |(By Robert Gernhardt)

2 years, 2 months

1
1
0 0

Re: [TUHS] Re: Unix game origins - stories similar to Crowther's Adventure

by Dan Cross

[TUHS to Bcc] On Wed, Feb 1, 2023 at 2:11 PM Rich Salz <rich.salz(a)gmail.com> wrote: > On Wed, Feb 1, 2023 at 1:33 PM segaloco via TUHS <tuhs(a)tuhs.org> wrote: >> In the annals of UNIX gaming, have there ever been notable games that have operated as multiple processes, perhaps using formal IPC or even just pipes or shared files for communication between separate processes (games with networking notwithstanding)? > > https://www.unix.com/man-page/bsd/6/hunt/ > source at http://ftp.funet.fi/pub/unix/4.3bsd/reno/games/hunt/hunt/ Hunt was the one that I thought of immediately. We used to play that on Suns and VAXen and it could be lively. There were a number of such games, as Clem mentioned; others I remember were xtrek, hearts, and various Chess and Go servers. - Dan C.

2 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

COFF February 2023