[pups] 2.11BSD and KFQSA
jcampbell at ins-msi.com
Mon Apr 1 22:43:07 AEST 2002
Chuck Dickman wrote:
> After a week or so of trying, I finally got 2.11BSD to recognize a KFQSA
> in a PDP-11/73. The problem seems to be that 2.11BSD sets an MSCP packet
> length of 64 bytes, but the KFQSA must have this field set to 60 bytes.
The correct command packet length is 48 decimal or 060 octal bytes.
End message packets also are this size unless error logging has been
turned on during controller initialization. Then response packets should
be 384 bytes long.
> There is some confusion about if the header is part of the packet or
> not. For the KFQSA, it is not included in the length. After that, life
> is good........
> Unfortunately I trashed my 2.11BSD installation in the process. :-( I
> did a backup I think.....
> Anyway, KFQSA modules are not that expensive and RF drives are pretty
> cheap, so it is another solution to the lack of disk drives for QBus
> PDPs. As long as you have a VAX for configuration. A 390MB RF71 is a
> useful size for 2.11BSD.
> After I get things put back together, I will send off a patch to sms for
> the next release.... :-)
> PUPS mailing list
> PUPS at minnie.tuhs.org
n8wxs at arrl.net
More information about the TUHS