On 23-Mar-06, at 2:57 PM, Robin wrote:

Ah,

That’s a good suggestion.  I’ll dig my way round the redhat config stuff and see if I can find one to switch off.



Look at "iptables".

--Toby


 

Robin

 

From: Toby Thain [mailto:toby@smartgames.ca]
Sent: 23 March 2006 06:37
To: robinb@ruffnready.co.uk
Subject: Re: [pups] Supnik Emulator on Redhat Linux

 

 

On 20-Mar-06, at 1:54 PM, Robin wrote:



Hi,

I have successfully got the supnik emulator up and running on redhat but have hit a problem, which is probably configuration and serves to show how little I know about more recent unices.

 

To allow computer to emulator comms I have installed a second card and enabled it under linux.  It is enabled with a different address to the first one 192.168.1.10 and 192.168.1.11.  The emulator can see both of the devices and I have attached device 1 (eth1) as xq0.

 

I run up BSD2.11 on the emulator and it attaches to the ether device at start up. 

 

I can ftp from the emulator to the host and back again if I start ftp on the emulator.

 

I can’t telnet to the host.

 

I can’t telnet from the host to the emulator.

 

I can’t ftp from the host to the emulator.

 

I also can’t telnet in from a telnet session to the listening socket set up for a DZ11 (I could before I started trying to get the networking up).

 

Ideas anyone?

 

 

Sounds like firewall to me.

 

--Toby



 

Robin

_______________________________________________

PUPS mailing list